Abstract:A new nondestructive pressure-measurement method that can avoid potential safety problems caused by applying traditional pressure-measurement methods in vessels is presented. This method utilizes ultrasonic Rayleigh waves and critically refracted longitudinal waves ( L CR waves). The change in pressure induces a change in the stresses in the vessel's wall. According to the acoustoelastic principle, variations in stress affect the wave velocity. Meanwhile, the velocity of ultrasonic waves can also be affected by the change in temperature. Considering the effect of the pressure and temperature of the vessel on both the wave velocity and propagation distance of the ultrasonic waves, the relationship between ultrasonic transit time delay and both the pressure and temperature change is established. Furthermore, a modified model of pressure measurement is deduced. With this model, a reference method for temperature compensation, without temperature measurement, is presented. The reference method utilizes Rayleigh waves and L CR waves. These two kinds of ultrasonic waves travel along the axial direction of the vessel's wall, bearing the same changes in pressure and temperature. The relationship between the reference transit time delay between two ultrasonic transducers and the pressure is established through theoretical analysis and calibration tests on an air vessel. To reduce the error caused by the unevenness of temperature distribution, which might occur in the vessel's and the transducer's material, a new kind of transducer is used in the experiment, which has two piezoelectric elements and can be used for the Rayleigh and L CR waves. A pair of such transducers is mounted along the axial direction of the air vessel. The penetration area of the Rayleigh wave is almost the same as that of the L CR wave with the use of the new transducers. Comparison tests between the new transducers and the custom-used transducers show that the new transducers have better repeatability. Finally, using the air vessel as a specimen, experimental results show that the reference method is effective and that the pressure values calculated using the reference method are close to the manometer-measured values.

Study on water level sensors in NHR-200 vessel

A novel encoding water level monitor system during and after LOCAs in a nuclear heating reactor

Measurement of Particle Materials and Liquid Level

Research on Nuclear Post-accident Liquid Level Detection Signal Deviation in Nuclear Power Plant Reactor Building

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and <formula> <tex>$l_{\rm CR}$</tex> </formula> Waves

Investigation on thermohydraulic characteristics of novel superheated steam supply system for low temperature nuclear heating reactor

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

Noninvasive Liquid Level Sensing with Laser Generated Ultrasonic Waves

Natural Circulation Differential Pressure Measurement Correction Technology Based on IAPWS-IF97

A New Nondestructive Technique for Measuring Pressure in Vessels by Surface Waves

Liquid Collapse Level Monitoring for Nuclear Reactors During Loss of Coolant Accident

Liquid Level Measurement and Control in High Temperature and High-pressure Environments of Nuclear Power Plant

Development of Novel Sensor for Fuel Balls Detection in High Temperature Gas-Cooled Reactor

Inductance transducer coded by coils and armatures for control rod position

Measurement of surface temperature and pressure of thin-walled vessels based on Rayleigh wave

New Level Sensor System for Ship Stability Analysis and Monitor

Investigation of Model-Based Anomaly Detection Method for the Full-Power Natural Circulation Small Modular Reactor NHR200-II

Control Rod Position Measurement with Helix-Electrode Capacitance Sensor in Nuclear Heating Reactor

Numerical and experimental investigation on NbTi superconducting liquid helium level sensor based on a resistance heating

Analysis Of The Nhr-200 Nuclear Sea Water Desalination Plant And Its Interface Design

Improving Water Pressure Measurement Using Temperature-Compensated Wireless Passive SAW Bidirectional RDL Pressure Sensor