Abstract:Metal 3D Printing (M3DP) has rapidly grown as a viable manufacturing method over recent years. These methods promise reducing the barrier to entry for prototyping and fabricating highly complex geometries that are almost impossible to create using traditional metal manufacturing processes, such as casting and machining. There are several M3DP methods that are widely accepted for prototyping applications, but almost no methods provide mass-scale and reliable fabrication of metal components for industrial use. One potential method which has shown a lot of promise over the past few years is binder jetting (BJet). Unlike most laser-based M3DP prototyping applications which generate parts on a point-by-point basis, BJet has the ability to fabricate parts on a layer-by-layer basis allowing for arrays of components to be generated simultaneously on one print bed while maintaining a similar resolution quality compared to laser-based processes. This process is predominantly available through original equipment manufacturers (OEM) as they require extensive pre-processing of a computer-aided design (CAD) before printing. This is due to the highly porous green parts which emerge from the printer before sintering. During sintering, one can observe extreme shrinkage and warping of geometries, which widely vary based on the geometric features. This study presents a computational framework to model the qualitative deformation of BJet green parts during sintering. We utilize a fully coupled thermo-mechanical model with space-varying mechanical and thermal properties to characterize the porous, viscous material during sintering. An Affine-particle-in-cell (APIC) material point method (MPM) is used to track large deformations in the component. A 2-dimensional numerical example is shown with qualitative comparison of BJet sintered components shown in literature. Ongoing work looks to integrate this physical model with a data-driven model to more efficiently predict the deformation of M3DP components during bulk sintering.

Binder jetting in gears

Metal Binder Jetting Additive Manufacturing: A Literature Review

Powder-Binder Jetting Large-Scale, Metal Direct-Drive Generators: Selecting the Powder, Binder, and Process Parameters

Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges

Binder jetting: A review of process, materials, and methods

Powder reusability in Metal Binder Jetting

Process development for green part printing using binder jetting additive manufacturing

Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals

State of the art of metal powder bonded binder jetting printing technology

Optimization of Binder Jetting Using Taguchi Method

Fabrication of Cu-Infiltrated Journal Bearing by Binder Jetting Additive Manufacturing

Non-heat source forming technology of binder jetting metal powder and its post-treatment process

Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing

Predictive Binder Jet Additive Manufacturing enabled by Clean Burn-off Binder Design

A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics

Binder jetting 3D printed cemented carbide: Mechanical and wear properties of medium and coarse grades

Powder Optimization for Enhanced Printing and Sintering of Porous Tungsten in Binder Jet Printing

Towards Binder Jetting and Sintering of AZ91 Magnesium Powder

A coupled thermo-mechanical material point model of binder jetted green part sintering

Enhancing Quality Control: Image-Based Quantification of Carbides and Defect Remediation in Binder Jetting Additive Manufacturing