Abstract:Binder jetting is a sinter-based additive manufacturing technique that integrates the layer-wise deposition in powder bed-based 3D printing with the sintering workflows of metal injection molding (MIM). For each of these powder-based processes, different feedstock characteristics such as spreadability or sinterability is required, and the powder size distribution is typically tuned to achieve the desired characteristics. However, while feedstock sizes have already been commercially standardised for MIM and powder bed fusion processes, a standard size has not been identified for binder jet. In this work, the printability of fine (D50: 14 µm) and coarse (D50: 25 µm) copper powder, representing common MIM and powder bed fusion feedstock sizes, was evaluated on a commercial binder jetting print system. Differences in particle size distribution, flowability, apparent and tapped density of the powders were characterised and correlated to deposited powder bed density, dimensional accuracy, geometrical stability, bulk density and surface topography of the green parts. Furthermore, a novel process-design solution was developed to mitigate layer-shifting print defects observed with the fine powder. The results demonstrate the flexibility of binder jet to produce green parts of varying densities as precursors to high density or high porosity sintered components. Using a layer thickness of 50 µm, a significant green part relative density above 63% was achieved using the fine powder, and a green part porosity above 55% was achieved using the coarse powder. Sintering was conducted at temperatures close to the melting point of copper; however, the formation of carbonaceous by-products prevented densification and necessitates further work before high sintered density can be achieved. Nevertheless, the coarse powder shows promising potential towards the fabrication of porous copper structures with a post-sintered relative density of 51%.

Powder Optimization for Enhanced Printing and Sintering of Porous Tungsten in Binder Jet Printing

Enhancing the Capillary Force of Binder-Jetting Printing Ti6Al4V and Mechanical Properties under High Temperature Sintering by Mixing Fine Powder

State of the art of metal powder bonded binder jetting printing technology

Non-heat source forming technology of binder jetting metal powder and its post-treatment process

A printability evaluation of fine and coarse powder in binder jetting of dense and porous copper parts

Improving Laser Powder Bed Fusion Printability of Tungsten Powders Using Simulation-Driven Process Optimization Algorithms

Study on powder particle behavior in powder spreading with discrete element method and its critical implications for binder jetting additive manufacturing processes

Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing

Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals

Bimodal powder optimization in SiC binder jetting for mechanical performance

A Versatile Thermally Initiated Crosslinking Binder for Additive Manufacturing of Strong Structures

Influence of Various Binder Jet Printers on the Additive Manufacturing of Hardmetals

Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites

Powder Extrusion Printing and Sintering Densification Behaviors of Ultrafine 98W-1Ni-1fe Alloy Powder

Binder jetting 3D printed cemented carbide: Mechanical and wear properties of medium and coarse grades

Correlation of Different Cemented Carbide Starting Powders with the Resulting Properties of Components Manufactured via Binder Jetting

Effect of feedstock bimodal powder design and cold isostatic pressing on the mechanical behavior of binder jetting additive manufactured Inconel 718 superalloy

Enhancing Mechanical Performance of Sinter-Based Additively Manufactured Ti-6Al-4V Parts Through Hydrogen Sintering and Phase Transformation (HSPT) Process

Overcoming the Penetration–saturation Trade-off in Binder Jet Additive Manufacturing Via Rapid in Situ Curing

A thermal-initiated monomer binder enhancing green strength with low binder saturation for binder jetting additive manufacturing of cemented carbide

Laser Powder Bed Fusion of Pure Tungsten: Effects of Process Parameters on Morphology, Densification, Microstructure