Abstract:Binder jetting is a sinter-based additive manufacturing technique that integrates the layer-wise deposition in powder bed-based 3D printing with the sintering workflows of metal injection molding (MIM). For each of these powder-based processes, different feedstock characteristics such as spreadability or sinterability is required, and the powder size distribution is typically tuned to achieve the desired characteristics. However, while feedstock sizes have already been commercially standardised for MIM and powder bed fusion processes, a standard size has not been identified for binder jet. In this work, the printability of fine (D50: 14 µm) and coarse (D50: 25 µm) copper powder, representing common MIM and powder bed fusion feedstock sizes, was evaluated on a commercial binder jetting print system. Differences in particle size distribution, flowability, apparent and tapped density of the powders were characterised and correlated to deposited powder bed density, dimensional accuracy, geometrical stability, bulk density and surface topography of the green parts. Furthermore, a novel process-design solution was developed to mitigate layer-shifting print defects observed with the fine powder. The results demonstrate the flexibility of binder jet to produce green parts of varying densities as precursors to high density or high porosity sintered components. Using a layer thickness of 50 µm, a significant green part relative density above 63% was achieved using the fine powder, and a green part porosity above 55% was achieved using the coarse powder. Sintering was conducted at temperatures close to the melting point of copper; however, the formation of carbonaceous by-products prevented densification and necessitates further work before high sintered density can be achieved. Nevertheless, the coarse powder shows promising potential towards the fabrication of porous copper structures with a post-sintered relative density of 51%.

Microstructure and Properties of Tungsten-40 Wt.-% Copper Composites Fabricated by Binder Jet 3D Printing

Microstructure and Properties of W Cu Composites with Low Copper Content at Different Sintering Temperatures

Fabrication of Titanium and Copper-Coated Diamond/Copper Composites via Selective Laser Melting

Mechanical behavior and microstructure of 3D-printed carbon nanotubes-reinforced Cu composite

Development of Tungsten-Based Materials by Different Sintering Techniques

A printability evaluation of fine and coarse powder in binder jetting of dense and porous copper parts

An exploration of binder jetting of copper

Powder Optimization for Enhanced Printing and Sintering of Porous Tungsten in Binder Jet Printing

Study on the structure and thermal properties of graphite/copper laminated composites assembled by Ti-containing active filler metals

Microstructure and properties of tungsten copper produced by hot deformation densification technology

Mechanical Properties of a Novel Tungsten Fiber-Reinforced Tungsten Composite Prepared Through Powder Extrusion Printing and High-Pressure High-Temperature Sintering

Research on Densification of Tungsten-Copper Powders by Sintering and Hot Hydrostatic Extrusion

Microstructure and thermal properties of copper matrix composites reinforced by 3D carbon fiber networks

Freeze-casted tungsten skeleton reinforced copper matrix composites

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Effect of structural modification on the thermophysical properties of graphite films/diamond sandwich copper thermally conductive composite film

Effect of the microstructure and properties of graphite/copper composites fabricated by microwave sintering

Fabrication, mechanical and thermal properties of tungsten-copper coated graphite flakes reinforced copper matrix composites

Effect of Microwave-Activated Sintering on Microstructure and Properties of Graphite/Copper Composites

Effect of bimodal powder on densification and mechanical properties of 316L stainless steel fabricated by binder jet 3D printing

Engineering performance of tungsten network reinforced copper matrix composites synthesized by selective laser melting and infiltration