Abstract:The effect of coating cracking during depth-sensing indentation testing (e.g. nanoindentation testing) on systems comprising thin hard coatings (e.g. TiN) on a less stiff, hard substrate (e.g. steel) has been investigated in order to establish whether, at such small scales, the occurrence of annular through-thickness cracks around indentation sites can be detected from load–displacement plots and whether any accompanying localized debonding of the coating from the substrate can also be identified. Experiments were performed on thin TiN and NbN monolayers, and compositionally modulated TiN/NbN and TiN/ZrN deposited onto hard steel or stainless steel substrates. Above a critical load (Pcrit) in the range 80–500mN, all systems exhibited annular through-thickness cracks around indentation sites. The cracking was found to be accompanied by a discrete change in gradient of the loading portion of the load–displacement curve. Also, analysis of the unloading curves beyond this point showed that elastic recovery was controlled by the elastic modulus of the underlying substrate material alone. The cracking mechanism has been characterized using scanning electron microscopy, coupled with optical profilometry to map the detailed z-displacement of the surface — a procedure critical to understanding whether coating–substrate debonding had occurred. Some cracks were found to show a spiral morphology and the effect of indentation loading rate was investigated to see if appearance of these cracks was loading-rate sensitive. Our results highlight the problems inherent in assessing both the interfacial failure and the interfacial fracture toughness of thin film coated systems at the small contact scales (⩽1μm) associated with crack genesis where it is difficult to confirm the extent of sub-surface cracks by conventional means. We have also demonstrated that both load–displacement and load–displacement squared plots are necessary if a more complete understanding of system behaviour is to be gained. Also, a simple fracture mechanics model for the annular cracking behaviour seen in such systems has been derived and used to estimate a value of Gic (the interfacial work of fracture) as 180Jm−2 for the TiN/ZrN-stainless steel system.

Lateral cracks in soda-lime glass under the threshold load due to the interaction of indentations

Surface damage resistance and yielding of chemically strengthened silicate glasses: From normal indentation to scratch loading

In situ observation of fatigue crack propagation in soda‐lime glass with initial crack and residual stress induced by Vickers indentation under four‐point bending

Statistical Analysis of Fracture Toughness of Soda-Lime Glass Determined by Indentation

Lateral‐pushing induced surface lift‐up during nanoindentation of silicate glass

Evaluation of crack initiation load of silica glass surfaces formed during subcritical crack growth

Scratch test of soda-lime glass

Nanoindentation-induced evolution of atomic-level properties in silicate glass: Insights from molecular dynamics simulations

Nanoindentation‐induced evolution of atomic‐level properties in silicate glass: Insights from molecular dynamics simulations

The effect of coating cracking on the indentation response of thin hard-coated systems

Impact of strain rate on the Indentation Size Effect: Evidence of an intimate link between Size effect, Strain Rate and Ductility in Soda-lime Silica glass

Indentation of Coatings at micro/nano scale: Crack formation and deflection

The Competing Effect of Initial Crack Depth Versus Chemical Strengthening Parameters on Apparent Fracture Toughness of Sodium Aluminosilicate Glass

Quantification of degradation of nanomechanical properties around a static damage

Role of densification in deformation behaviors of model metallic glasses under 3-D nanoindentation studied in molecular dynamics simulation

Study of mechanical deformation in bulk metallic glass through instrumented indentation

Nondestructively determining local strength and residual stress of glass by Hertzian indentation

Sink-in/pile-up formation and crack nucleation mechanisms of high purity fused silica and soda-lime silica glass during nanoindentation experiments

Crack Formation Process during Indentation or Scratching on the Surface of MgO Single Crystals

Fracture from Knoop Indentation-Induced Flaws in Sintered Silicon Carbide and Hot-Pressed Silicon Nitride

Crack path instabilities in DCDC experiments in the low speed regime