Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

Cryogenic Overcurrent Characteristic of GaN HEMT and Converter Evaluation

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

Reliability-Driven Assessment of GaN HEMTs and Si IGBTs in 3L-ANPC PV Inverters

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Design of Low-Inductance Switching Power Cell for GaN HEMT Based Inverter

A Buck Converter with Cost-Effective GaN/Si Hybrid Switches and CRM Operation for High-Efficiency and High-Power-Density Applications

A 3kw GaN HEMT Based Three-phase Converter Achieving a Switching Frequency of 300khz and an Efficiency of 97.06%

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

Output Phase and Amplitude Analysis of GaN-Based HEMT at Cryogenic Temperatures

Review of GaN HEMT Applications in Power Converters over 500 W

Comparison of the performance of Si, SiC, and GaN based switching elements in high gain DC-DC boost converter

High frequency and high power density bipolar DC–DC converter with GaN HEMT

Comparisons on Different Innovative Cascode GaN HEMT E-Mode Power Modules and Their Efficiencies on the Flyback Converter

A Comparative Study of GaN HEMT and Si MOSFET-Based Active Clamp Forward Converters

A 10-Mhz Isolated Class DE Resonant DC/DC Converter Based on GaN HEMT

A GaN HEMT Integrated Power Module with Silver Sintering Processes

High Temperature Characteristics of GaN-Based Inverter Integrated With Enhancement-Mode (E-Mode) MOSFET and Depletion-Mode (D-Mode) HEMT

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

Temperature Dependence of Dynamic Performance Characterization of 1.2-kV SiC Power mosfets Compared With Si IGBTs for Wide Temperature Applications

Active Thermal Management of GaN-on-SiC HEMT with Embedded Microfluidic Cooling

Recent Advances in GaN‐Based Power HEMT Devices