Abstract:Over the last few decades, the demand for lightweight constructions has been increased continuously for several industrial applications, like automotive and ship building, to reduce the weight of vessels in order to minimize the CO2 emissions as a result of a lower fuel consumption. Lightweight construction is almost applied for ship applications, especially for yachts, which are designed by using aluminum for the deck constructions and steel for the ship hull. For joining these parts, a high-power laser welding process shall be developed. However, the welding of these dissimilar materials is associated with great challenges, due to the different physical properties and the formation of hard and brittle intermetallic phases, which may influence negatively the properties of the weld seam. The quality of dissimilar joints depends strongly on the mixture ratio between the molten amount of steel and aluminum. However, the mixture ratio varies over the weld seam length due to a high dynamic of the keyhole resulted by welding of this material combination. Furthermore, different batches of materials and varied sheet thicknesses t may influence the mixture ratio. In this study, a high-power laser welding process is developed with in-process control of the penetration depth tP by analyzing the spectral process emissions for dissimilar lap joints of aluminum alloy EN AW-6082 (t = 8 mm) and steel S355 (t = 5–7 mm). In the context of these investigations, an increase of occurring cracks within the weld seam and ejections of molten material with increasing penetration depth tP can be observed. To achieve a relative high joint strength, the penetration depth tP must be kept constant at a value of 1.4 mm. In case of varied batch of material, thickness t of the used sheets, welding speed vS, and leap of the steel sheet thickness t, the penetration depth tP requested cannot be achieved. Using the in-process control of the penetration depth tP, the weld seam quality remains almost constantly over the weld seam length, as shown in visual inspections, metallographic analyses, profiles of the penetration depth tP, and tensile shear testing. Among other things, the appearance of ejections of molten material can be avoided by using the in-process control of the penetration depth tP.

Optimization of laser beam spot welding (LBSW) parameters to maximize the load bearing capability of AHS-DP1000 steel lap joints

Tensile shear fracture load bearing capability, softening of HAZ and microstructural characteristics of resistance spot welded DP-1000 steel joints

Optimization of mechanical properties of rotary friction welding parameters of low alloy steel tubes using design of experiments concept

Optimal weld bead profiles in the conduction mode LBW of thin Ti–6Al–4V alloy sheets

Application of machine learning approaches to predict joint strength of friction stir welded aluminium alloy 7475 and PPS polymer hybrid joint

NUMERICAL MODEL FOR OPTIMIZING THE PARAMETERS FOR LASER-BEAM WELDING OF A HIGH-TEMPERATURE MATERIAL

Process Parameter Optimization in Refill Friction Spot Welding of 6061 Aluminum Alloys Using Response Surface Methodology

Investigating the effect of residual stresses and distortion of laser welded joints for automobile chassis and optimizing weld parameters using random forest based grey wolf optimizer

Experimental And Optimization-Based Analysis To Maximize Mechanical-Related Attributes Of Friction Stir Welded Cda101 Cu Alloy Joints

Laser Beam Welding Parametric Optimization for AZ31B and 6061-T6 Alloys: Residual Stress and Temperature Analysis Using a CCD, GA and ANN

Experimental and Numerical Study on Local Mechanical Properties and Failure Analysis of Laser Welded Dp980 Steels

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Process optimization and thermomechanical simulation of residual stresses and temperature distribution in the laser-beam penetration welds of 61Ni-21Cr-9Mo alloy and 99.3Fe-0.45Mn-0.2C steel joints

Laser Hybrid Welding—An Advanced Joining Technique for Welding of Thick Plates of Maraging Steel

Fatigue and impact properties of single and double resistance spot welding for high-strength steel used in automotive applications

Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum joints

A multi-response optimization approach to mechanical properties improvement of dissimilar resistance spot welding joints

Influence of CO2 Laser Beam Welding Process Parameters on Mechanical Properties of Alloy AISI 4130 Steel Welded Joints

Enhancement of joint strength of dissimilar aluminum/polymer hybrid joints by friction stir spot welding by surface textures

A data-driven framework to improve the wear resistance of a low-alloy steel fabricated by laser powder bed fusion

Residual stress distribution of aluminium-lithium alloy in hybrid process of friction stir welding and laser peening