Abstract:The heat transfer mechanism and temperature distribution in laser welding applications have a great impact on the quality of the weld bead geometry, mechanical properties and the resultant microstructure characterizations of the welding process. In this study, the effects of pulsed laser welding parameters including the frequency and pulse width on the melt velocity field and temperature distribution in dissimilar laser welding of stainless steel 420 (S.S 420) and stainless steel 304 (S.S 304) was investigated. A comprehensive comparison was conducted through the numerical simulation and artificial neural network (ANN). The results of numerical simulation indicated that buoyancy force and Marangoni stress are the most important factors in the formation of the flow of liquid metal. Also, increasing the pulse width from 8 to 12 ms due to increasing the pulse energy, the temperature in the center of the melt pool increased about 250 °C. This leads to increasing the convective heat transfer in the molten pool and heat affected zone (HAZ). The temperature difference at a distance of 1 mm from the beam center at both metals at a frequency of 15 and 20 Hz is bout 58 and 75 °C, respectively. Furthermore, reducing the frequency to 5 Hz, due to diminishment of thermal energy absorption time, has clearly decreased the weld penetration depth in the workpiece. According to the ANN results, increasing both pulse duration and frequency has the significant effect on increasing melting ratio from 0.4 to 0.8 compared to the other input parameters. The ANN results confirmed that under the same input conditions, because of the differences in thermal conductivity coefficient, absorption coefficient and melting point of the two pieces, S.S 304 has experienced higher temperatures about 10% more than S.S 420. Also, among the 13 back propagation learning algorithms, the Bayesian regularization algorithm had the best performance. Among the number of different neurons in the hidden layer, comparison was performed to prevent network overfitting. The maximum relative error of network output data and target data for S.S 304 and S.S 420 temperatures and melting ratio were 7.297, 10.16 and 11.33%, respectively.

Laser Beam Welding Parametric Optimization for AZ31B and 6061-T6 Alloys: Residual Stress and Temperature Analysis Using a CCD, GA and ANN

A Thermal Analysis of LASER Beam Welding Using Statistical Approaches

Numerical modeling and simulation for laser beam welding of ultrafine-grained aluminium

Effect of nanosecond pulse laser power on welding interface and mechanical properties of AZ31B Mg/6061 Al

Systematic evaluation of pulsed laser parameters effect on temperature distribution in dissimilar laser welding: A numerical simulation and artificial neural network

Optimization of Laser Spiral Welding Using Response Surface Methodology and Genetic Algorithms.

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Process optimization and thermomechanical simulation of residual stresses and temperature distribution in the laser-beam penetration welds of 61Ni-21Cr-9Mo alloy and 99.3Fe-0.45Mn-0.2C steel joints

Correlation of Process Parameters and Porosity in Laser Welding of 7A52 Aluminum Alloy Using Response Surface Methodology

Optimization of laser beam spot welding (LBSW) parameters to maximize the load bearing capability of AHS-DP1000 steel lap joints

Insight into the Key Process Parameters on Residual Stress Distribution in Deep Drawing of Laser-Welded Blanks: Response Surface Modeling

Applying Statistical Models Optimize the Process of Multi-Pass Narrow-Gap Laser Welding with Filler Wire

Optimal weld bead profiles in the conduction mode LBW of thin Ti–6Al–4V alloy sheets

Optimization of Process Parameters for Laser Cutting of AZ31B Magnesium Alloy Based on Orthogonal Experiment and BP Neural Network

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO

Effect of laser process parameters on thermal behavior and residual stress of high-strength aluminum alloy processed by laser powder bed fusion

Numerical Simulation Study of Laser-arc Hybrid Welding of 6063/5083 Aluminum Alloy

Microscopic and Mechanical Properties Characterization of Laser Beam Welded 5754 to 6063 Aluminum Alloys

Experimental investigations on mechanical properties of AA6061-T6 aluminum alloy joined by laser welding using digital image correlation

Computational Modeling and Experimental Validation of Thermal Stress and Melt Pool Characteristics Using High Power Laser Diode Beam on 7075 Aluminum Alloy

Numerical simulation and optimization in pulsed Nd: YAG laser welding of Hastelloy C-276 through Taguchi method and artificial neural network