Abstract:The heat transfer mechanism and temperature distribution in laser welding applications have a great impact on the quality of the weld bead geometry, mechanical properties and the resultant microstructure characterizations of the welding process. In this study, the effects of pulsed laser welding parameters including the frequency and pulse width on the melt velocity field and temperature distribution in dissimilar laser welding of stainless steel 420 (S.S 420) and stainless steel 304 (S.S 304) was investigated. A comprehensive comparison was conducted through the numerical simulation and artificial neural network (ANN). The results of numerical simulation indicated that buoyancy force and Marangoni stress are the most important factors in the formation of the flow of liquid metal. Also, increasing the pulse width from 8 to 12 ms due to increasing the pulse energy, the temperature in the center of the melt pool increased about 250 °C. This leads to increasing the convective heat transfer in the molten pool and heat affected zone (HAZ). The temperature difference at a distance of 1 mm from the beam center at both metals at a frequency of 15 and 20 Hz is bout 58 and 75 °C, respectively. Furthermore, reducing the frequency to 5 Hz, due to diminishment of thermal energy absorption time, has clearly decreased the weld penetration depth in the workpiece. According to the ANN results, increasing both pulse duration and frequency has the significant effect on increasing melting ratio from 0.4 to 0.8 compared to the other input parameters. The ANN results confirmed that under the same input conditions, because of the differences in thermal conductivity coefficient, absorption coefficient and melting point of the two pieces, S.S 304 has experienced higher temperatures about 10% more than S.S 420. Also, among the 13 back propagation learning algorithms, the Bayesian regularization algorithm had the best performance. Among the number of different neurons in the hidden layer, comparison was performed to prevent network overfitting. The maximum relative error of network output data and target data for S.S 304 and S.S 420 temperatures and melting ratio were 7.297, 10.16 and 11.33%, respectively.

Numerical simulation and optimization in pulsed Nd: YAG laser welding of Hastelloy C-276 through Taguchi method and artificial neural network

Systematic evaluation of pulsed laser parameters effect on temperature distribution in dissimilar laser welding: A numerical simulation and artificial neural network

Process optimization and thermomechanical simulation of residual stresses and temperature distribution in the laser-beam penetration welds of 61Ni-21Cr-9Mo alloy and 99.3Fe-0.45Mn-0.2C steel joints

Numerical Simulation of Pulsed Nd-YAG Laser Butt Welding of AISI 304L Stainless Steel Sheet and Experimental Validation

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

G010023 Numerical Simulation for Phenomenological Evaluation of Laser Welding Processes

Laser Beam Welding Parametric Optimization for AZ31B and 6061-T6 Alloys: Residual Stress and Temperature Analysis Using a CCD, GA and ANN

Nd: YAG laser cutting of Hastelloy C276: ANFIS modeling and optimization through WOA

Numerical Study of the Effect of Laser-Arc Distance on Laser Energy Coupling in Pulsed Nd: YAG Laser/tig Hybrid Welding

Model for Numerical Simulation of Temperature Field and Bead Profile in Hybrid Laser-Arc Welding of T-Joint

Numerical simulation of the temperature field, weld profile, and weld pool dynamics in laser welding of aluminium alloy

Numerical modeling and simulation for laser beam welding of ultrafine-grained aluminium

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO

Numerical simulation analysis of laser-arc hybrid welding of austenitic stainless steel

Multi-objective optimisation of pulsed Nd:YAG laser cutting process using integrated ANN–NSGAII model

Numerical Simulation for Temperature Field in Molten Pool of Deep Penetration Laser Welding of High Strength Steel

Numerical simulation of thermo-mechanical coupling in laser-MIG hybrid welding utilizing dual volume heat sources

Numerical Simulation of Temperature Field and Residual Stress Distribution for Laser Cladding Remanufacturing

Numerical modeling of heat transfer and fluid flow in hybrid laser–TIG welding of aluminum alloy AA6082

Investigation on Mechanical Behavior of Friction Stir Welded Nylon-6 Using Temperature Signatures

Thermomechanical Process Simulation and Experimental Verification for Laser Additive Manufacturing of Inconel®718.