Abstract:This work addresses the prediction and optimization of average surface roughness (Ra) and maximum flank wear (Vbmax) of 6061 aluminum alloy during high-speed milling. The investigation was done using a DMU 50 CNC 5-axis machine with Ultracut FX 6090 fluid. Four factors were examined: the table feed rate, cutting speed, depth of cut, and cutting length. Three levels of each factor were examined to conduct 81 experiment runs. The response parameters in these experiments were measurements of Ra and Vbmax. We applied a two-pronged approach that combines machine learning (ML) and a Nondominated Sorting Genetic Algorithm (NSGA-II) to model and optimize Ra and Vbmax. Four ML models were used to predict Ra and Vbmax: linear regression (LIN), support vector machine regression (SVR), a gradient boosting tree (GBR), and an artificial neural network (ANN). The input variables were the significant factors that affect the surface quality and tool wear: the feed rate, depth of cut, cutting speed, and cutting time. Several quality metrics were employed to quantify the performance of the models, such as the root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). As a result, SVR and ANN were found to have the best predictive performance for Ra and Vbmax. These models and the NSGA-II-based approach were then employed for multiobjective optimization of cutting parameters during high-speed milling of aluminum 6061. Fifty Pareto solutions were found with Ra in the range of 0.257 to 0.308 μm and Vbmax in the range of 136.198 to 137.133 μm. Experimental validations were then conducted to confirm that the optimum solution was within an acceptable error range. More precisely, the absolute percentage errors for Ra and Vbmax were 2.5% and 1.5%, respectively. This work proposes an effective strategy for efficiently combining machine learning techniques and the NSGA-II multiobjective optimization algorithm. The experimental validations have reflected the potential for applying this strategy in various machining-optimization problems.

Multi-objective optimisation of pulsed Nd:YAG laser cutting process using integrated ANN–NSGAII model

Multi-Objective Optimization of Pulsed Nd: YAG Laser Cutting Process Using Entropy-Based ANN-PSO Model

Modeling and process parameter optimization of laser cutting based on artificial neural network and intelligent optimization algorithm

Modeling And Multi-Response Optimization Of Abrasive Water Jet Machining Using Ann Coupled With Nsga-Ii

Optimization of femtosecond laser processing parameters of SiC using ANN-NSGA-II

Multi-objective optimization of fiber laser cutting quality characteristics of glass fiber reinforced plastic (GFRP) materials

Prediction and optimization of Nd: YAG laser transmission micro-channelling on PMMA employing an artificial neural network model

Neural Network Modeling and Particle Swarm Optimization (PSO) of Process Parameters in Pulsed Laser Micromachining of Hardened AISI H13 Steel

An Improved Artificial Neural Network for Laser Welding Parameter Selection and Prediction

Optimization of backpropagation neural network-based models in EDM process using particle swarm optimization and simulated annealing algorithms

Nd: YAG laser cutting of Hastelloy C276: ANFIS modeling and optimization through WOA

Selective LASER Melting Part Quality Prediction and Energy Consumption Optimization

A combined approach of artificial neural network, multi-objective genetic algorithm, and response surface methodology for enhanced PMMA micro-channeling in low power fiber laser beam machining

Surface Quality Optimization of Laser Cladding Based on Surface Response and Genetic Neural Network Model

Predicting and Enhancing the Multiple Output Qualities in Curved Laser Cutting of Thin Electrical Steel Sheets Using an Artificial Intelligence Approach

Multi- objective modeling and optimization of dissimilar laser welding by integrating an artificial intelligence predictive model with NSGA-II algorithm

Study on optimization of laser cladding process parameters of aluminum alloys using a prediction model of the neuralgenetic algorithm

A Prediction Model for Additive Manufacturing of AlSi10Mg Alloy

Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II

Prediction and optimization kerf width in laser beam machining of titanium alloy using genetic algorithm tuned adaptive neuro-fuzzy inference system

Multi-objective optimization of T-shaped bilateral laser welding parameters based on NSGA-II and MOPSO