Abstract:Nowadays, anodized coating on additively manufactured (AM) or 3D printed Al-10Si-Mg alloy are used for various components in spacecraft such as antenna feeds, wave guides, structural brackets, collimators, thermal radiators etc. In this study, Artificial Neural Network (ANN) and Power law-based models are developed from experimental nanoindentation data for predicting elastic modulus and hardness of anodized AM Al-10Si-Mg at any desired loads. Data from nanoindentation experiments conducted on plan- and cross-sections of anodized coating on AM Al-10Si-Mg alloy was considered for modelling. Apart from nanomechanical properties, load and displacement curves were predicted using Python software from ANN and the Power law model of nanoindentation. It is observed that the ANN model of 50 mN nanoindentation experimental data can accurately predict the loading pattern at any desired load below 50 mN. Elastic modulus and hardness of anodized AM Al-10Si-Mg computed from ANN and the power law model of the unloading curve are also comparable with the values obtained from Weibull distribution analysis reported elsewhere. The derived models were also used to predict nanomechanical properties at 25 and 35 mN, for which no experimental data was available. The computed hardness of plan section of the anodic coating is 3.99 and 4.02 GPa for 25 and 35 mN, respectively. The computed hardness of cross-section of the anodic coating of is 7.16 and 6.61 GPa for 25 and 35 mN, respectively. Thus, the ANN and Power law model of nanoindentation can predict elastic modulus and hardness at different loads by conducting the minimum number of experiments. The novel approach to predict nanomechanical properties using ANN resulted in determining realistic and design specific data on hardness and modulus of the anodized coating on AM Al-10Si-Mg alloy.

A Prediction Model for Additive Manufacturing of AlSi10Mg Alloy

Machine learning-enabled predictions of as-built relative density and high-cycle fatigue life of Ti6Al4V alloy additively manufactured by laser powder bed fusion

Predicting the Fatigue Life of Additively Manufactured AlSi10Mg Alloy Using a Physics-Informed Neural Network Incorporating Continuous Damage Mechanics

On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg

Process Parameter Dependent Machine Learning Model for Densification Prediction of Selective Laser Melted Al-50Si Alloy and its Validation

Machine Learning Enabling Prediction in Mechanical Performance of Ti6Al4V Fabricated by Large-Scale Laser Powder Bed Fusion Via a Stacking Model

On the Prediction of Flow Stress Behavior of Additively Manufactured AlSi10Mg for High Temperature Applications

Machine learning approach towards laser powder bed fusion manufactured AlSi10Mg thin tubes in laser shock peening

Experimental investigation and development of a deep learning framework to predict process-induced surface roughness in additively manufactured aluminum alloys

Assessing the Process-Property Relationship in Laser Powder Bed Fusion of AlSi10Mg Using Kalman Filter-Based Machine Learning Algorithms

Selective LASER Melting Part Quality Prediction and Energy Consumption Optimization

Data-driven density prediction of AlSi10Mg parts produced by laser powder bed fusion using machine learning and finite element simulation

Characterisation and prediction of mechanical properties in laser powder bed fusion-printed parts: a comparative analysis using machine learning

Artificial Neural Network-based approach for prediction of nanomechanical properties of anodic coating on additively manufactured Al-10Si-Mg alloy

An ANN／GA(Artificial Neural Network／Genetic Algorithm)for Modeling and Optimizing of Liquid Metal Extrusion Process

A Comparative Study of Machine Learning Methods for Computational Modeling of the Selective Laser Melting Additive Manufacturing Process

A universal predictor-based machine learning model for optimal process maps in laser powder bed fusion process

A dimensionally augmented and physics-informed machine learning for quality prediction of additively manufactured high-entropy alloy

Machine learning approach for predicting the machining characteristics of additive manufactured ABS material

Comment about lack of sufficient data on “A prediction model for finding the optimal laser parameters in additive manufacturing of NiTi shape memory alloy” by Mehrpouya et al. [The International Journal of Advanced Manufacturing Technology 105.11 (2019): 4691–4699.]