Abstract:Part dimensional inaccuracies serve as a barrier from adopting Additive Manufacturing (AM) processes in mass production. Fused Deposition Modeling (FDM) is a thermoplastic based low cost AM process which can create conceptual models, prototypes and end user industrial parts. The current study involves predicting the optimal parameter settings and significant parameter for reduced geometric deviations in printed part using Nylon filament reinforced with 20% carbon fiber. Five input factors such as build orientation, layer thickness, infill density, raster angle and infill pattern have been considered for preparing the experimental layout through taguchi�s mixed fractional factorial design. The changes in length, width and thickness of the printed part from CAD value have been evaluated individually through ANOVA and Signal to Noise Ratio method (Smaller the better). Layer thickness is significant only for variations in length, but build orientation affects both width and thickness dimensions. The geometric deviations are further analyzed using combined multi criteria decision making (MCDM) approaches such as Entropy-CoCoSo and PCA-TOPSIS. The optimal parameter settings obtained for reduced geometric deviations is found to be Flat orientation, 0.1mm layer thickness, 50% infill density, 0� raster angle and cubic infill pattern. Layer thickness is found to be highly significant parameter influencing the geometric deviations subsequently followed by build orientation from both the MCDM methods. The multi response performance index values obtained from Entropy-CoCoSo has been trained using classification algorithms such as decision tree, random forest and Naive Bayes. Naive Bayes algorithm outperformed other methods with highest classification accuracy of 99.4% in a training-testing split ratio of 75:25.

Machine learning approach for predicting the machining characteristics of additive manufactured ABS material

3D Printing of Acrylonitrile Butadiene Styrene by Fused Deposition Modeling: Artificial Neural Network and Response Surface Method Analyses

Prediction of tensile strength using machine learning algorithms in fused deposition modeling

A machine learning approach to characterise fabrication porosity effects on the mechanical properties of additively manufactured thermoplastic composites

Prediction of Optimal Parameter Settings and Significant Parameter for Reduced Geometric Deviations Through Multi Criteria Decision Making and Machine Learning Algorithms

Machine learning in predicting mechanical behavior of additively manufactured parts

A Comparative Study of Machine Learning Methods for Computational Modeling of the Selective Laser Melting Additive Manufacturing Process

The use of machine learning in process–structure–property modeling for material extrusion additive manufacturing: a state-of-the-art review

Machine Learning Model Selection for Performance Prediction in 3D Printing

Optimization of FDM 3D printing process parameters for multi-material using artificial neural network

Machine learning approach for prediction analysis of aluminium alloy on the surface roughness using CO2 laser machining

Investigation of Fused Filament Fabrication-Based Manufacturing of ABS-Al Composite Structures: Prediction by Machine Learning and Optimization

MechProNet: Machine Learning Prediction of Mechanical Properties in Metal Additive Manufacturing

Additively Manufactured Carbon-Reinforced ABS Honeycomb Composite Structures and Property Prediction by Machine Learning

A Prediction Model for Additive Manufacturing of AlSi10Mg Alloy

Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials

Towards the Next Generation of Machine Learning Models in Additive Manufacturing: A Review of Process Dependent Material Evolution

Predicting geometric errors and failures in additive manufacturing

Toward data-driven research: preliminary study to predict surface roughness in material extrusion using previously published data with Machine Learning

Estimation of friction and wear properties of additively manufactured recycled-ABS parts using artificial neural network approach: effects of layer thickness, infill rate, and building direction