Abstract:Purpose Fused Filament Fabrication (FFF) is one of the growing technologies in additive manufacturing, that can be used in a number of applications. In this method, process parameters can be customized and their simultaneous variation has conflicting impacts on various properties of printed parts such as dimensional accuracy (DA) and surface finish. These properties could be improved by optimizing the values of these parameters. Design/methodology/approach In this paper, four process parameters, namely, print speed, build orientation, raster width, and layer height which are referred to as "input variables" were investigated. The conflicting influence of their simultaneous variations on the DA of printed parts was investigated and predicated. To achieve this goal, a hybrid Genetic Algorithm – Artificial Neural Network (GA-ANN) model, was developed in C#.net, and three geometries, namely, U-shape, cube and cylinder were selected. To investigate the DA of printed parts, samples were printed with a central through hole. Design of Experiments (DoE), specifically the Rotational Central Composite Design method was adopted to establish the number of parts to be printed (30 for each selected geometry) and also the value of each input process parameter. The dimensions of printed parts were accurately measured by a shadowgraph and were used as an input data set for the training phase of the developed ANN to predict the behavior of process parameters. Then the predicted values were used as input to the Desirability Function tool which resulted in a mathematical model that optimizes the input process variables for selected geometries. The mean square error of 0.0528 was achieved, which is indicative of the accuracy of the developed model. Findings The results showed that print speed is the most dominant input variable compared to others, and by increasing its value, considerable variations resulted in DA. The inaccuracy increased, especially with parts of circular cross section. In addition, if there is no need to print parts in vertical position, the build orientation should be set at 0° to achieve the highest DA. Finally, optimized values of raster width and layer height improved the DA especially when the print speed was set at a high value. Originality/value By using ANN, it is possible to investigate the impact of simultaneous variations of FFF machines' input process parameters on the DA of printed parts. By their optimization, parts of highly accurate dimensions could be printed. These findings will be of significant value to those industries that need to produce parts of high DA on FFF machines.

Predicting geometric errors and failures in additive manufacturing

A High-Confidence Geometric Compensation Approach for Improving Downward Surface Accuracy

Knowledge-based manufacturability assessment for optimization of additive manufacturing processes based on automated feature recognition from CAD models

Prediction of Optimal Parameter Settings and Significant Parameter for Reduced Geometric Deviations Through Multi Criteria Decision Making and Machine Learning Algorithms

Prediction of tensile strength using machine learning algorithms in fused deposition modeling

Improving precision of material extrusion 3D printing by in-situ monitoring & predicting 3D geometric deviation using conditional adversarial networks

Analytical Probabilistic Modeling of Additive Manufacturing-Induced Process Defects and Experimental Validation

Machine learning approach for predicting the machining characteristics of additive manufactured ABS material

Machine learning for additive manufacturing: Predicting materials characteristics and their uncertainty

Machine Learning Based Fault Anticipation for 3D Printing*

Application of artificial neural network to evaluation of dimensional accuracy of 3D‐printed polylactic acid parts

Development of a Manufacturability Predictor for Periodic Cellular Structures in a Selective Laser Melting Process Via Experiment and ANN Modelling

Qualify assessment for extrusion-based additive manufacturing with 3D scan and machine learning

Prediction of Geometric Dimensions of Deposited Layer Produced Using Laser-arc Hybrid Additive Manufacturing

Manufacturability Feedback and Model Correction for Additive Manufacturing

Predicting part distortion field in additive manufacturing: a data-driven framework

Manufacturability Oriented Model Correction and Build Direction Optimization for Additive Manufacturing

Towards smart monitored AM: Open source in-situ layer-wise 3D printing image anomaly detection using histograms of oriented gradients and a physics-based rendering engine

Intelligent accuracy control service system for small-scale additive manufacturing

Development of a Genetic Algorithm – Artificial Neural Network model to optimize the Dimensional Accuracy of parts printed by FFF

Automated Real‐Time Detection and Prediction of Interlayer Imperfections in Additive Manufacturing Processes Using Artificial Intelligence