Abstract:Hot working, as an important group of post-processing routes for additive manufacturing technology (3D printing), is used to reduce the solidification/processing defects and anisotropy of properties, grain refinement, improvement of mechanical properties, processing of pre-formed parts, and increasing the applicability domain. Accordingly, the present state of the art of the elevated temperature deformation behavior and constitutive description of flow stress during thermomechanical processing of additively manufactured parts is summarized in this monograph. Besides the effects of temperature and strain rate (represented by the Zener-Hollomon parameter), the significance of initial phases and the type of additive manufacturing process on the hot deformed microstructure, restoration processes of dynamic recovery (DRV) and dynamic recrystallization (DRX), flow stress, workability, and hot deformation activation energy is critically discussed. In this regard, the α'-martensite in Ti-6Al-4V titanium alloy produced by selective laser melting (SLM), the precipitates in aluminum alloys (such as 2219 Al alloy) produced by wire and arc additive manufacturing (WAAM), and the Laves phase in Inconel 718 superalloy produced by laser metal deposition (LMD) are remarkable examples. The utilization of innovative methods with in situ hot working effects such as additive friction stir deposition (AFSD) is also enlightened. Regarding the constitutive equations for modeling and prediction of hot flow stress, the reports on the strain-compensated Arrhenius model, artificial neural network (ANN) approach, DRX/DRV kinetics models, Johnson-Cook equation, and Fields-Backofen formula are presented, and the potentials of the modified, simplified, and physically-based approaches are discussed. Finally, the future prospects in this research field such as the hybridization of additive manufacturing with hot forming processes, work-hardening analysis for obtaining the onset of DRX, unraveling the effects of as-built microstructure, developing processing maps, proposing some physical-based unified constitutive models, and investigation of novel and/or widely-used alloys such as austenitic stainless steels, high-entropy alloys, and aluminum alloys (e.g. AlSi10Mg alloy) are proposed.

On the Prediction of Flow Stress Behavior of Additively Manufactured AlSi10Mg for High Temperature Applications

Hot Deformation Flow Behaviour Modelling of Cast-Extruded Al 7075 Alloy Using Arrhenius Equations and Artificial Neural Network

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Prediction of Flow Stress of Annealed 7075 Al Alloy in Hot Deformation Using Strain-Compensated Arrhenius and Neural Network Models

Predicting specific wear rate of laser powder bed fusion AlSi10Mg parts at elevated temperatures using machine learning regression algorithm: Unveiling of microstructural morphology analysis

Application of Constitutive Models and Machine Learning Models to Predict the Elevated Temperature Flow Behavior of TiAl Alloy

Modeling of hot deformation behavior and prediction of flow stress in a magnesium alloy using constitutive equation and artificial neural network (ANN) model

A Prediction Model for Additive Manufacturing of AlSi10Mg Alloy

The Prediction of Flow Stress in the Hot Compression of a Ni-Cr-Mo Steel Using Machine Learning Algorithms

Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy

Predicting Flow Stress Behavior of an AA7075 Alloy Using Machine Learning Methods

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

Fatigue life prediction of additively manufactured AlSi10Mg based on surface roughness and residual stress

Two new mathematical models to predict the flow stress at hot deformation

The flow behavior of homogenizated Al-Mg-Si-La aluminum alloy during hot deformation

On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg

Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress

Constitutive Modeling of High-Temperature Flow Behavior of Al-0.62Mg-0.73Si Aluminum Alloy

Flow Stress Models for 40Cr10Si2Mo Steel and Their Application in Numerical Simulation of Hot Forming

High-Temperature Mechanical Properties of Stress-Relieved AlSi10Mg Produced via Laser Powder Bed Fusion Additive Manufacturing

Optimization of Flow Behavior Models by Genetic Algorithm: A Case Study of Aluminum Alloy