Abstract:Maraging steels are leading members of the ultra-high strength steel family due to a combination of two solid state reactions: martensitic transformation and subsequent ageing. These steels can be hardened by the precipitation of refined Ni-3(Ti, Mo) intermetallic particles. They have been widely used in the military and aerospace applications such as solid rocket motor cases and submarine shells due to their high strength and toughness. The T250 maraging steel has used Ti as one of the primary strengthening elements to replace Co, which decreases the cost of maraging steels. Its properties are comparable to the standard Co-bearing grades in the 1.4 similar to 2.1 GPa strength levels. It possesses good weldability without porosity in the weld and other weld defects. However, the combination of strength and toughness of welded joints is the main problem which has not been solved well via different welding methods so far. In this work, T250 maraging steel plate with 2 mm thickness was hybrid-treated with laser welding and aging treatment. The strength and toughness of welded joints aged before and after welding were investigated. The microstructures of parent metals and welded joints were observed with OM and SEM. Chemical compositions in parent metals and weld zones were analyzed with EPMA. The tensile strength and static toughness were acquired with the auxiliary device of Gleeble machine and could represent strength and toughness of the welded joints. The results show that the tensile strength and static toughness of the welded joint aged before welding are 62% and 28% that of the aged parent metal, respectively. However, the tensile strength and static toughness of the welded joint aged after welding reach 98% and 71% that of the aged parent metal, respectively. The weld metal is the key zone to influence the strength and toughness of the welded joints. Ni-3(Ti, Mo) precipitates in the weld metal are the intrinsic reason resulting in that the strength and toughness of the welded joint aged after welding are superior to that of the welded joint aged before welding. Ni-3(Ti, Mo) precipitates are beneficial to the strength and static toughness in the elastic deformation stage, and it has a dual effect on the static toughness in the plastic deformation stage of the welded joints. The reverted austenite has a negligible effect on the strength and static toughness in the elastic deformation stage, while it is detrimental to the static toughness in the plastic deformation stage of the welded joints.

Laser Hybrid Welding—An Advanced Joining Technique for Welding of Thick Plates of Maraging Steel

Effects of Laser Premelting Treatment on Microstructure and Mechanical Properties of High-Strength Steel Weld Obtained by Laser-MAG Hybrid Welding

Laser and hybrid laser welding of type 316L(N) austenitic stainless steel plates

Strength and Toughness of T250 Maraging Steel Joint Hybrid-Treated with Laser Welding and Aging

Effect of Post-Weld Heat Treatments on Strength and Toughness Behavior of T-250 Maraging Steel Welded by Laser Beam

The Significance and Design of Hybrid Process in Governing High Strength-High Toughness Combination of Fiber Laser-Welded T-250 Maraging Steel Joint

Dissimilar Laser Welding of Austenitic Stainless Steel and Abrasion-Resistant Steel: Microstructural Evolution and Mechanical Properties Enhanced by Post-Weld Heat Treatment

Effect of Post Weld Heat Treatment on the Microstructure and Properties of Laser-TIG Hybrid Welded Joints for CLAM Steel

A novel approach to suppression of reverted austenite in aerospace grade thick maraging steel weldments using the turbo-TIG welding process

Evaluation of Maraging Steel Produced Using Hybrid Additive/Subtractive Manufacturing

Effect of heat treatment on the microstructure and mechanical properties of 2.4 GPa grade maraging steel fabricated by laser powder bed fusion

Studies on Microstructure and Mechanical Properties of Weldments Produced in 12 mm Thick Naval Grade High Strength Low Alloy Steel for Sub-Zero Application by Single and Double Pass Hybrid Laser Arc Welding

HEAT TREATMENT EFFECT ON MARAGING STEEL MANUFACTURED BY LASER POWDER BED FUSION TECHNOLOGY: MICROSTRUCTURE AND MECHANICAL PROPERTIES

Microstructural Characterization of Laser Weld of Hot-Stamped Al-Si Coated 22MnB5 and Modification of Weld Properties by Hybrid Welding

Microstructure and Mechanical Properties of Narrow Gap Laser-Arc Hybrid Welded 40 mm Thick Mild Steel

Fiber Laser Welding of 1700-MPa, Ultrahigh-Strength Steel

The Effect of Post-Weld Aging Treatments on the Microstructure, Texture, and Mechanical Properties of Grade 250 Maraging Steel Laser Weldments

Microstructure and Performance of Hybrid Laser-Arc Welded 40 Mm Thick 316 L Steel Plates

Influence of in-situ process parameters, post heat treatment effects on microstructure and defects of additively manufactured maraging steel by laser powder bed fusion-A comprehensive review

Study on Microstructure and Properties of Laser Dissimilar Welded Joints of Ultra-High Strength PHS1500/PHS2000 Steel

Process stability during fiber laser-arc hybrid welding of thick steel plates