Abstract:Laser powder bed fusion (LPBF) additive manufactured high-strength aluminum alloys modified with Sc and Zr rare earth elements have wide prospects for lightweight and high-performance applications in aerospace industries. Nevertheless, driven by the target of achieving even higher performance, significant requirements are put forward for laser parameter optimization and resultant residual stress control for the laser additive manufactured parts. In this work, the thermal behavior, solidification behavior, and microstructure evolution of Al-Mg-Si-Mn-Sc-Zr aluminum alloy under various LPBF process parameters were carefully studied through simulations and experiments, and the evolution mechanisms of residual stress during LPBF were also revealed. The finite element simulation analysis showed distinct characteristics of temperature gradient ( G ) and solidification rate ( R ) within the molten pool. The top of the molten pool exhibited a higher G · R value (5.8–8.5 × 10 6 K/s) and a lower G / R value (0.9–2.1 × 10 7 K·s/m 2 ), contributing to the formation of fine equiaxed grains. The bottom displayed a lower G · R value (4.1–4.6 × 10 6 K/s) and a higher G / R value (1.5–5.1 × 10 7 K·s/m 2 ), facilitating the development of coarse columnar grains. As a higher laser power was applied, the simulation results indicated an increased temperature gradient in the molten pool, and the XRD analysis confirmed that the average residual stress increased from 85.9 to 169.7 MPa. The relationship between laser process parameters, molten pool morphology, grain distribution, and residual stress was established, demonstrating that the residual stress of Al-Mg-Si-Mn-Sc-Zr alloy could be tailored by optimizing laser process parameters.

Residual stress distribution of aluminium-lithium alloy in hybrid process of friction stir welding and laser peening

Research on the Residual Stress Induced by Square-Spot Laser Shock Peening on 2024-T351 Specimens

Homogenization of Local Microstructure and Mechanical Properties in Friction Stir Welded Al-Cu Alloy Joint Achieved Through Laser Shock Peening

Experimental Investigation of Laser Peening Effects on Tensile Properties of AA2195-T6 Friction Stir Welded Joints

Effects of Residual Stress Induced by Laser Shock Peening on Mixed-Mode Crack Propagation Behavior in 7075-T6 Aluminum Alloy Panel

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Effect of laser process parameters on thermal behavior and residual stress of high-strength aluminum alloy processed by laser powder bed fusion

Residual Stress and Fatigue Property of Laser Shock Peening 2050 Aluminum-Lithium Alloy

Influence of laser shock peening on Residual stress and microhardness of AA2219 friction stir weld

Influence of Laser Peening Parameters on Residual Stress Field of 304 Stainless Steel

Influence of laser parameters on residual stress field of AISI 304 stainless steel induced by laser peening: A finite element analysis

Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite

The effect of laser shock peening on very high cycle fatigue properties of laser welded 2A60 aluminum alloy joints

Effect of Laser Shock Processing on Residual Stress Evolution in Martensitic Stainless Steel Multi-Pass Butt-Welded Joints

Residual Stress Field Induced by Laser Peening: a Finite Element Analysis

Unraveling Residual Stress Distribution Characteristics of 6061-T6 Aluminum Alloy Induced by Laser Shock Peening

Crystal Plasticity Evaluation of Laser Peening Effects on Improving High-Cycle Fatigue Life of Al-Li Friction Stir Welded Joints

Optimization Of Residual Stresses Induced By Multiple Laser Shock Processing

The effects of laser peening on laser additive manufactured 316L steel

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening