Abstract:Wetting of ZrO 2 –3 mol% Y 2 O 3 substrates by a molten Zr 55 Cu 30 Al 10 Ni 5 bulk metallic glass forming alloy was studied using a modified sessile drop method at 1133–1473 K in a high vacuum and their interfacial chemistry was investigated. The time variation in the contact angle shows anomalous temperature dependence at 1133–1293 K, i.e., the initial contact angle gradually decreases while the final contact angle increases with increasing temperature. In the range of 1293–1473 K, the contact angle sharply decreases in the initial stage but shows little change in the subsequent long isothermal duration. A distinct reaction layer consisting of substoichiometric ZrO 2− x was developed at the interface. The remarkable temperature dependence of the wettability is due to the competition among the adsorption and accumulation of the active atoms such as Zr at the interface, the interfacial reaction, and the release of oxygen from ZrO 2. The adsorption of Zr at the triple junction, particularly enhanced by the structural transition of ZrO 2 , plays an important role in promoting the wettability. In contrast, the oxygen release leads to the oxidation of the active atoms and ready pinning of the triple line, thus deteriorating the wettability. The interfacial reaction may promote the wetting as well, but its role is limited because on the one hand, it consumes the adsorbed active Zr atoms, and on the other, the pinning of the triple line due to the compositional oxidation considerably weakens its function.

Reactive wetting of high-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 ceramic by molten 71Ag–27Cu–2Ti alloy at 1073–1273 K

Reactive wetting and infiltration of polycrystalline WC by molten Zr2Cu alloy

Reactive Wetting and Interfacial Characterization of ZrO2 by SnAgCu-Ti Alloy

Reactive Wetting of AgCuTi Filler Metal on the TiAl-based Alloy Substrate

Reactive Wetting of Tic-Ni Cermet by Ag-Cu-Zn Alloy During Evaporation

Wetting of FeCoCrNiTi0.2 high entropy alloy on the (HfZrTiTaNb)C high entropy ceramic

Temperature Dependence of the Wettability Between Glass‐Forming Alloy Zr55Cu30Al10Ni5 and Polycrystalline ZrO2

Wetting and spreading of AgCuTi on Fe substrate at high temperatures: A molecular dynamics study

Wetting of WC by a Zr-base Metallic Glass-Forming Alloy

Wetting and spreading behavior of AgCuTi on Ti substrate: A molecular dynamics study

Reaction Induced Anomalous Temperature Dependence of Equilibrium Contact Angle of TiZr Based Glass Forming Melt on Al2O3 Substrate

Reactive wetting of Ti-6Al-4V alloy by molten Al 4043 and 6061 alloys at 600–700°C

Reactive wetting and interfacial reaction mechanism of ZrC-SiC ceramic and Ag-Zr filler

Insight into the Wetting Behavior and Interfacial Evolution of Sn-xZr/ZrO2 Systems at 850-950 ℃

Wettability of molten titanium in Ti/zirconia system

Wettability Of Molten Ti On Zro2

High-temperature wetting behavior of molten Ni-based superalloy on Y2O3 ceramics with different surface microstructures

Wetting and Interfacial Phenomena Between a Ni-based Superalloy and Silica-Based Ceramic Cores with ZrSiO4 Additions

Wettability of Ti6Al4V on Calcia-Stabilized Zirconia

Investigations on Interface Reactions and Wettability Between Melt Superalloys and Ceramic Materials

Microstructure Evolution and Wettability of Ag-Cu-Zn Alloy on TiC-Ni Cermet