Abstract:Wetting of ZrO 2 –3 mol% Y 2 O 3 substrates by a molten Zr 55 Cu 30 Al 10 Ni 5 bulk metallic glass forming alloy was studied using a modified sessile drop method at 1133–1473 K in a high vacuum and their interfacial chemistry was investigated. The time variation in the contact angle shows anomalous temperature dependence at 1133–1293 K, i.e., the initial contact angle gradually decreases while the final contact angle increases with increasing temperature. In the range of 1293–1473 K, the contact angle sharply decreases in the initial stage but shows little change in the subsequent long isothermal duration. A distinct reaction layer consisting of substoichiometric ZrO 2− x was developed at the interface. The remarkable temperature dependence of the wettability is due to the competition among the adsorption and accumulation of the active atoms such as Zr at the interface, the interfacial reaction, and the release of oxygen from ZrO 2. The adsorption of Zr at the triple junction, particularly enhanced by the structural transition of ZrO 2 , plays an important role in promoting the wettability. In contrast, the oxygen release leads to the oxidation of the active atoms and ready pinning of the triple line, thus deteriorating the wettability. The interfacial reaction may promote the wetting as well, but its role is limited because on the one hand, it consumes the adsorbed active Zr atoms, and on the other, the pinning of the triple line due to the compositional oxidation considerably weakens its function.

Wetting Behavior and Interface Characteristic of Ti<sub>32.8</sub>Zr<sub>30.2</sub>Ni<sub>5.3</sub>Cu<sub>9</sub>Be<sub>22.7</sub>/Ti6Al4V

Reaction Induced Anomalous Temperature Dependence of Equilibrium Contact Angle of TiZr Based Glass Forming Melt on Al2O3 Substrate

EFFECTS OF THE ADDITION OF Ti OR Al ON THE WETTING BEHAVIORS AND INTERFACIAL CHARACTERISTICS OF Zr 50 Cu 50 BULK METALLIC GLASS/W SUBSTRATE

Wetting of WC by a Zr-base Metallic Glass-Forming Alloy

Temperature Dependence of the Wettability Between Glass‐Forming Alloy Zr55Cu30Al10Ni5 and Polycrystalline ZrO2

Effect of Ti addition on properties of Zr54Al10.2Ni9.4Cu26.4 glass forming alloy

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Glass formation, microstructure evolution and mechanical properties of Zr 41.2 Ti 13.8 Cu 12.5 Ni 10 Be 22.5 and its surrounding alloys

PREPARATION AND PROPERTIES OF HIGH STRENGTH BULK METALLIC GLASS Ti_(53)Cu_(15)Ni_(18.5)Al_7M_3Si_3B_(0.5) (m=zr, Hf, Sc)

Preparation and Crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 Bulk Metallic Glass with Wide Supercooled Liquid Region

Effect of Ti addition on supercooled liquid region and glass forming ability of bulk amorphous Zr60Cu20Ni10-xAl10Tix alloys

Glass forming ability of bulk(Zr0.6Cu0.2Ni0.1Al0.1)100-xTix amorphous alloys

Effects of Zn Interlayer on Microstructures and Mechanical Properties of TC4/AZ91D Bimetal via Solid–Liquid Compound Casting Process

EFFECT OF Ti ADDITION ON THE GLASS--FORMING ABILITY OF (Zr0.59cu0.18ni0.13al0.10)100-Xtix ALLOYS

Thermal Stability and Mechanical Properties of Zr50Ti5Cu18Ni17Al10 Bulk Metallic Glass

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

Wettability of Ti6Al4V on Calcia-Stabilized Zirconia

Tribological properties of Ti40Zr25Ni8Cu9Be18 bulk metallic glasses under different conditions

Influences of Impurity Alloying on Thermal Stability and Mechanical Properties of Zr50Ti4Y1Al10Cu25Ni7Co2Fe1 Bulk Metallic Glass

Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites

Cu-alloying Effect on Crystallization Kinetics of Ti41Zr25Be28Fe6 Bulk Metallic Glass

Wetting Behavior and Interface Characteristic of Ti&lt;sub&gt;32.8&lt;/sub&gt;Zr&lt;sub&gt;30.2&lt;/sub&gt;Ni&lt;sub&gt;5.3&lt;/sub&gt;Cu&lt;sub&gt;9&lt;/sub&gt;Be&lt;sub&gt;22.7&lt;/sub&gt;/Ti6Al4V