Abstract:Bulk metallic glasses (BMGs) bear versatile advantages compared to traditional crystalline metallic materials. However, preparation of large size BMG components remains a great challenge due to the lack of understanding the casting dynamics of BMGs. The present work investigates the dynamics of the solidification process during casting of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 BMG by measuring the time-dependent temperature evolution and constructing distance–time curves showing the progress of solidification. The experimentally probed temperature evolution proves that a higher casting temperature causes a lower cooling rate and induces more pronounced nanocrystal phase formation in the final BMG casting. Thus, optimization of the casting temperature is crucial for casting BMG components. The solidification coefficient K of the studied Zr-based BMG in copper mold was determined. The solidification time can be calculated with model: τ=M2K2. The solidification of the Zr-based BMG occurs in a narrow transition layer region following a “layer-by-layer” solidification mode. This feature is vital for designing the casting process appropriately to avoid the formation of casting defects in BMG components. The present work sheds new light on the solidification mechanism of bulk glass-forming liquids and underlines the importance of optimizing the technology and processing conditions for fabrication of BMG components with practical applications.

Influence of the Melting Temperature on the Fabrication of A Ti-Cu-Zr-Ni-Sn Bulk Metallic Glass

Influence of Casting Temperature on the Castability and Glass-Forming Ability of Zr-based Bulk Metallic Glasses

Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glasses

Effect of Casting Temperature on the Solidification Process and (micro)structure of Zr-based Metallic Glasses

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Influences of Impurity Alloying on Thermal Stability and Mechanical Properties of Zr50Ti4Y1Al10Cu25Ni7Co2Fe1 Bulk Metallic Glass

Effect of Chemical Composition on the Thermoplastic Formability and Nanoindentation of Ti-Based Bulk Metallic Glasses

Preparation and Crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 Bulk Metallic Glass with Wide Supercooled Liquid Region

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Glass Forming Ability and Mechanical Properties of New Ni-Based Bulk Metallic Glasses

Fabrication of Cu-based Bulk Metallic Glasses by Binary Deep Eutectic Method

Improvement on the Melting and Casting Device under High Vacuum Condition for Fabrication of the Bulk Metallic Glasses

Fe–C micro-alloying effect on properties of Zr53Al11.6Ni11.7Cu23.7 bulk metallic glass

Effect of Sn on Glass Formation Ability and Crystallization Behaviors of Cu-Based Bulk Metallic Glass Alloy

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Research on Thermoplastic Formability and Nanomoulding Mechanism of Lightweight Ti-based Bulk Metallic Glasses

Ti Microalloying Effect on Corrosion Resistance and Thermal Stability of CuZr-based Bulk Metallic Glasses

Effect of Ti Addition on Crystallization Behavior of a Zr-based Bulk Metallic Glass

Effects of Cu Addition on the Glass Forming Ability and Corrosion Resistance of Ti-Zr-Be-Ni Alloys

Effect of Ti addition on mechanical properties of Zr-based bulk metallic glasses

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses