Abstract:Textile Research Journal, Ahead of Print. Three-dimensional mesh fabrics of one-piece spacer structure are an essential component of automotive seat ventilation systems due to their excellent cushion and ventilation performance. The mesh structure is manufactured by stretching across the width of as-knitted structure with closed surfaces in a coupled thermo-mechanical stentering and heat-setting process. This paper presents a numerical study to examine the effect of stentering on the mesh structure and yarn architecture of a typical three-dimensional mesh fabric by establishing a finite element model based on micro X-ray computed tomography reconstruction at the yarn level. The finite element model is verified with the global and local deformation of the mesh during the stentering process. The evolution of the yarn architecture in the stentering process is demonstrated and quantitatively analyzed in terms of curvature and torsion. Three-dimensional mesh fabrics of different mesh sizes and thicknesses after stentering at different ratios are also simulated to study their compression properties. The numerical and experimental results showed that stentering opens the meshes and simultaneously shortens, widens and thins the fabric. The meshes are unevenly distributed across the width, and the intermediate meshes are more open and uniform than the two selvage meshes. To obtain a three-dimensional mesh fabric with uniform and symmetrical meshes, the as-knitted fabric should be stretched coursewise to be wider than 2 times and narrower than 2.6 times its initial width. Stentering disperses, lengthens, tilts, bends and twists the spacer monofilaments, thereby broadening the compression plateau stage and decreasing the compression resistance.

Coupling Characteristics of Needles and Backing Cloth During the Carpet Tufting Process

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Analysis and Characterization of Interlaminar Tack for Different Prepreg Materials During Automated Fiber Placement

Finite Element Analysis of Dynamic Knitting Process on Flat Knitting Machine Based on ABAQUS

Numerical investigation of the tensile behaviors of needle-punched nonwoven geotextiles

Tensile Properties with or Without Heat Dispersion of Automotive Needlepunched Carpets Made Up of Two Layers of Different Materials

Numerical simulation of dynamic puncture behaviors of woven fabrics based on the Finite Element Method

Finite Element Modelling for Tensile Behaviour of Thermally Bonded Nonwoven Fabric

Finite element modeling and simulation of yarn in winding process

Numerical simulation of 3D angle-interlock woven fabric forming and compression processes

Modeling the tensile behaviour of needle punched nonwoven geotextiles

Needling model for predicting mechanical behaviours of waste cotton composites

Yarn-level numerical simulation based on micro-CT reconstruction for the stentering process of warp-knitted three-dimensional mesh fabric

Influence of Tension–shear Coupling on Draping of Plain Weave Fabrics

Numerical Model of the Static Loading of a Stitched Seam in the Composite Cover of Car Seat

A comparative study of physical properties of nonwoven fabrics produced by uni- and bi-directional needles using response surface methodology

Warp yarn tension coupling models and fuzzy PID control for enhancing warp beam unwinding tension stability in sizing machines

Dynamic puncture modeling of polyester needle-punched nonwoven geotextile fabrics using finite element method

Numerical Investigation on Central Tearing Behaviors and Propagation Mechanisms of Coated Warp-Knitted Fabrics

Numerical modeling and analysis of yarn-end-capturing based on the immersed boundary-lattice Boltzmann method

Withdrawal model for fiber motions in the tuft disentanglement