Abstract:Achieving compatibility between cell components is one of the major challenges for the widespread adoption of bulk-type solid-state batteries. In particular, superionic lithium thiophosphate solid electrolytes suffer from oxidation at high voltages when interfaced with state-of-the-art cathode materials. Here, we report on atomic layer deposition (ALD) of conformal HfO2 nanocoatings onto LiNi0.85Co0.10Mn0.05O2 (NCM-851005) cathode material. Based on electrochemical testing in high-loading (pellet-stack) solid-state battery cells, we demonstrate the positive effect of ALD HfO2 coating on the cyclability and stability of NCM-851005. Modification of the coating morphology by postannealing further improved the cycling performance considerably, especially the Coulombic efficiency in the initial cycles and the rate capability. The results demonstrate the ability of ALD to produce high-quality surface films on industrially relevant electrode materials, thus providing a suitable platform for systematic investigations into the functionality of protective coatings in solid-state and other batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01487.Cycling performance of the NCM-851005 coated by ALD of TEMAH/H2O or TEMAH/O3 (for 0, 10, 20, and 100 ALD cycles); HfO2 content from ICP-OES versus ALD cycles; XRD patterns collected from the NCM-851005 before/after coating and the Rietveld refinement profile for the bare NCM-851005; refined structural parameters; O 1s and Ni 2p core-level spectra for the bare and HfO2-coated NCM-851005 before/after heating; high- and low-magnification SEM images of the bare and HfO2-coated NCM-851005 before/after heating; XP spectra of the Hf 4d and 4f core-level regions for the HfO2-coated NCM-851005 before/after heating; calculation of lattice spacings from HRTEM images; determination of the coating thickness, EDS data, and mapping results for the annealed HfO2-coated NCM-851005; cycling performance of bare NCM-851005 in liquid-electrolyte-based LIB coin cells; cycling performance of the O3-treated (uncoated) NCM-851005 before/after heating in SSB cells; cross-sectional SEM imaging and EDS mapping of the cathode and cathode/separator interface of SSB cells using the annealed HfO2-coated NCM-851005 before/after cycling (PDF)This article has not yet been cited by other publications.

Conformal Buffer Layer Coating on Ni-Rich Cathode Powder via Particle Atomic Layer Deposition for All-Solid-State Batteries

First-Principles Study of Amorphous Al2O3 ALD Coating in Li-S Battery Electrode Design

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Interdiffusion suppression at the cathode‐electrolyte interface of all‐solid‐state‐batteries by Li3PO4 conformal coating

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through ultrathin and amorphous Al2O3 coating

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through an ultrathin and amorphous Al2O3 coating

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode for Stable All-Solid-State Sulfide-Based Batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode for Stable All-Solid-State Sulfide-Based Batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi0.6Co0.2Mn0.2O2 Cathode for Stable All-Solid-State Sulfide-Based Batteries

Solid Electrolyte Coated NCM523 for Composite Cathode in All-Solid-State Batteries

Stabilization of Li0.33La0.55TiO3 Solid Electrolyte Interphase Layer and Enhancement of Cycling Performance of LiNi0.5Co0.3Mn0.2O2 Battery Cathode with Buffer Layer

Powder Coatings via Atomic Layer Deposition for Batteries: A Review

Li3BO3-Li3PO4 Composites for Efficient Buffer Layer of Sulphide-Based All-Solid-State Batteries

Stabilized Cathode/Sulfide Electrolyte Interface through Conformally Interfacial Nanocoating for All-Solid-State Batteries

Conformal Li 2 HfO 3 /HfO 2 Nanoparticle Coatings on Layered Ni-Rich Oxide Cathodes for Stabilizing Interfaces in All-Solid-State Batteries

Coating Robust Layers on Ni-Rich Cathode Active Materials while Suppressing Cation Mixing for All-Solid-State Lithium-Ion Batteries

Rationally Designed Solution-Processible Conductive Carbon Additive Coating for Sulfide-based All-Solid-State Batteries

Argyrodite sulfide coated NCM cathode for the improved interfacial contact in normal-pressure operational all-solid-state batteries

Enhanced Electrochemical Stability and Extended Cycle Life in Sulfide-Based All-Solid-State Batteries: The Role of Li10 SnP2 S12 Coating on Ni-Rich NCM Cathode

High Performance All-Solid-State Batteries with a Ni-Rich NCM Cathode Coated by Atomic Layer Deposition and Lithium Thiophosphate Solid Electrolyte

An Environmental and Technical Evaluation of Vacuum-Based Thin Film Technologies: Lithium Niobate Coated Cathode Active Material for Use in All-Solid-State Battery Cells