Abstract:Ni-rich layered oxides (LiNixCoyMnzO2, x >= 0.8, x + y + z = 1) are attractive cathode material candidates for building high-energy-density batteries owing to their higher specific capacity compared to their lower-Ni-content analogues. However, the high nickel content also brings challenges, such as storage instability in ambient conditions and poor cycle life. In this work, we propose a surface chemistry regulation strategy to simultaneously enhance the air storage stability and electrochemical stability of high-nickel cathode materials. A bifunctional ultrathin layer composed of trimethoxy(1H,1H,2H,2H-perfluorodecyl)silane (PFDTMS) was constructed on the surface of single-crystal LiNi0.83Co0.12Mn0.05O2 (NMC811) particles via molecular self-assembly. The passivating PFDTMS layer forms a superhydrophobic surface on the modified NMC811 particles, effectively mitigating deactivation reactions of NMC811 in air, and ensuring an uncompromised electrochemical performance of NMC811-based electrode after storing in air for two weeks. Furthermore, the self-assembled PFDTMS layer contributes to the formation of an electrochemical stable cathode-electrolyte interphase (CEI) on the NMC811 surface, improving the cycling stability of NMC811 at high cut-off voltages. The PFDTMS-based CEI also alleviates the chemical corrosion of NMC811 by the electrolyte, slows down the dissolution of transition metal ions during long term cycling. These findings present a straightforward, effective, eco-friendly, and cost-efficient approach to tackle the stability challenges inherent to Ni-rich layered cathode materials.

Coating Robust Layers on Ni-Rich Cathode Active Materials while Suppressing Cation Mixing for All-Solid-State Lithium-Ion Batteries

Controlling the Microstructure of Cobalt-Free, High-Nickel Cathode Materials with Dopant Solubility for Lithium-Ion Batteries

Enhancing high-voltage structural stability of single-crystalline Ni-rich LiNi0.9Mn0.05Co0.05O2 cathode material by ultrathin Li-rich oxide layer for lithium-ion batteries

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through ultrathin and amorphous Al2O3 coating

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through an ultrathin and amorphous Al2O3 coating

Bifunctional Self-Assembled Molecular Layer Enables Stable Ni-rich Cathodes

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

A Bifunctional Chemomechanics Strategy to Suppress Electrochemo-Mechanical Failure of Ni-Rich Cathodes for All-Solid-State Lithium Batteries.

Nanomaterial coating for layered lithium rich transition metal oxide cathode for lithium-ion battery

Rational Design of Coating Ions via Advantageous Surface Reconstruction in High‐Nickel Layered Oxide Cathodes for Lithium‐Ion Batteries

Building a Self‐Adaptive Protective Layer on Ni‐Rich Layered Cathodes to Enhance the Cycle Stability of Lithium‐Ion Batteries

Simultaneously Dual Modification of Ni‐Rich Layered Oxide Cathode for High‐Energy Lithium‐Ion Batteries

Conformal Li 2 HfO 3 /HfO 2 Nanoparticle Coatings on Layered Ni-Rich Oxide Cathodes for Stabilizing Interfaces in All-Solid-State Batteries

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

Effect of electrochemically active element species on the stability of the layered cathode-sulfide electrolyte interface

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

Air- and Moisture Robust Surface Modification for Ni-Rich Layered Cathode Materials for Li-Ion Batteries

Artificial Layer Construction via Cosolvent Enables Stable Ni-Rich Cathodes for Enhanced Lithium Storage

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries