Rheological characteristics of bauxite slurry with varying concentration, particle size distribution, and modal distribution for pipeline transportation
Nosum Reddy,Jayanta Kumar Pothal,Nosum ReddyJayanta Kumar Pothala Design and Project Engineering Dept.,Academy of Scientific and Innovative Research (AcSIR),Council of Scientific and Industrial Research—Human Resource Development Group (CSIR-HRDG),Ghaziabad,Indiab Design and Project Engineering Department,CSIR-Institute of Minerals and Materials Technology,Bhubaneshwar,India
DOI: https://doi.org/10.1080/02726351.2024.2320102
IF: 2.628
2024-03-02
Particulate Science And Technology
Abstract:Some of the foremost parameters effecting the slurry rheology, preferably the slurry concentration, particle size distribution, and modal distributions, were studied in the current findings, figuring out the variation in shear stress and apparent viscosity using a rotational rheometer. The particle size considered for the test ranges from fine particle size of −75 μm to coarse particle size of +75–300 μm, separated at varied size fractions of +75–105, +105–150, +150–210, and +210–300 μm. The −75 μm bauxite slurry at 60 wt% has shown a maximum static settled concentration ( C w -max ) under gravity after 48 h free settlement. This fine particle slurry at varying concentrations of C w = 45–65% is discerned to behave like a Non-Newtonian Bingham plastic fluid at lower concentrations, unlike the other coarse fraction bauxite slurries at C w = 55%, which exhibit shear thickening behavior. The present work carried out adds knowledge on the rheological behavior of bimodal, trimodal, and multimodal with four and five different size fraction bauxite slurries in finding the optimum mass concentration for a particle size fraction of (coarse):(fine), obtained in the ratio (25):(75), (25:25):(50), (25:25:10):(40), and (15:15:15:15):(40), respectively of the total 60 wt%. Certain parameters, like yield stress, consistency index ( k ), and flow behavior index ( n ), were estimated upon fitting the modal distributions to the Herschel Bulkley model to choose the best particle size distribution of the bauxite sample showing improved slurry stability, rheology, and flow characteristics.
engineering, chemical