Research on Sustainable Development of Fine-Grained Material Cement Slurry
Yue Wu,Wei-guo Qiao,Hui-ni Liu,Yan-zhi Li,Shuai Zhang,Kai Xi,Lei Zhang
DOI: https://doi.org/10.1016/j.conbuildmat.2021.124155
IF: 7.4
2021-01-01
Construction and Building Materials
Abstract:Sustainability has become a major focus of the cement industry, largely due to the carbon dioxide emissions associated with Portland cement production. In grouting engineering, ordinary cement slurry has high viscosity, poor fluidity and groutability and is prone to blockage. In this study, a cement slurry was designed using superfine cement (SC). Fine-grained ultrafine fly ash (UFA) waste was used, part of which is used to replace cement, and a certain amount of nontoxic mSiO(2)center dot nH(2)O (SH) is extracted from limestone waste and mixed with the commonly used admixture polycarboxylic acid water reducer (PAWR) to ensure its physical properties in practical engineering applications while reducing its viscosity, increasing its fluidity, and reducing the occurrence of clogging. To determine the optimal mix ratio of the cement slurries mixed with various materials, the characteristics of each material were analyzed through the single-factor test of the multiperformance test, and the orthogonal test mix ratio was designed based on the single-factor test results. Through the Taguchi grey correlation analysis method, the orthogonal test data were analyzed to find the optimal mix ratio. A performance test of the cement slurry with the optimal mix ratio was carried out, and its sustainability was analyzed. Combined with the Discrete Element Method (DEM) and the Voronoi Calculation Method (VCM) methods, UDEC numerical simulation software is used to simulate and analyze the general laws of cement slurry fluidity. The results show that the cement slurry with the optimal mix ratio of SH, SC, PAWR and UFA materials has good fluidity and groutability, has the characteristics of sustainable development, and can be applied to practical projects.