Abstract:Superplasticizers, polyacrylate latexes and asphalt emulsions were employed to investigate the influences of chemical admixtures with different sizes on the pore structure and impermeability of hardened cement pastes. With different admixture types and contents, pore structure and impermeability of specimens cured for 28 days were tested by mercury intrusion porosimetry and alternating current impedance, respectively. Scanning electron microscopy was also used to observe the microstructure of fresh and hardened pastes. The results show that, porosity, average pore size and inkbottle pores volume in the hardened cement pastes as well as permeability presented slight decrease with the increase in the content of superplasticizers. For the specimens with low latex content, the pore size in the hardened cement paste remained unchanged, or was coarsened, and the compactness and impermeability declined; for those with high latex content, the pore size was refined and compactness and impermeability were enhanced. Both of the compactness and impermeability increased with the increase in asphalt emulsion content. At the same content, the latex Ll, having smaller particle size was more effective than latex L2 and, the anionic asphalt emulsion was more effective than cationic asphalt emulsion on improving pore structure and impermeability, respectively. It was accepted that chemical admixtures were able to improve the flowability of fresh paste by enhancing the dispersion of cement grains, further the effects were extended to affect the pore structure and impermeability of hardened one. Meanwhile, the polymer was also effective to compact the interfacial zone between phases by filling up the pore space, which would lead to more compact structure of hardened paste. For the same type of chemical admixture at low content, the pore structure and impermeability were mainly influenced by the dispersion of cement grains, while at high content, the filling effect become dominant. For different types of chemical admixtures with the same filling effect, the better dispersion of cement grains would result in finer pore structure and higher impermeability.

The Influence of Rheology for Different Superplasticizer on High Alumina Low Cement Castable

Influence of Superplasticizers on Early Age Drying Shrinkage of Cement Paste with the Same Consistency

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Study on the Synthesis and Rheological Properties of Polycarboxylate Superplasticizer with Different Main Link Density

Rheological Behaviours Of Slurries And Mechanical Properties Of Alumina With Additives

Effect of Dispersants on the Rheological Properties and Slip Casting of Concentrated Alumina Slurry

Influence of Hardened Paste Microstructure on Rheological Property of Cementing Slurries with High Density

Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers

Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers

Rheological and mechanical properties of aluminosilicious cementitious materials as refractory castable binders

Effects of different additives on properties of magnesium aluminate Spinel–Periclase castable

A Study of Rheological Behaviors of Al2O3-TiO2 Slurry

Effect of Alkali Content in Cement on the Fluidity and Structural Build-Up of Plasticized Cement Pastes

Rheological Behaviors of Fresh Cement Pastes with Polycarboxylate Superplasticizer

Influences Of Chemical Admixtures With Different Sizes On Pore Structure And Impermeability Of The Hardened Cement

Effects of Silica Fume/ultrafine Fly Ash on the Rheology and Hardening of Alkali-Activated Slag-Waste Ceramic Powder Paste

Admixture Effects on the Rheological/Mechanical Behavior and Micro-Structure Evolution of Alkali-Activated Slag Backfills

Influence of the flocculation effect on the rheological properties of cement slurry

Effectiveness Assessment of Superplasticizer Admixtures: Case of Self-compacting Concrete Reinforced with Fine Mineral Fillers

A Novel Approach to Methoxy Polyethylene Glycol-Grafted Sulfonated Poly(maleic Anhydride-Alt-styrene) As Superplasticizers in Cement Pastes

Rheological Behavior of Modified Starch-Alumina Oxide Suspensions