Abstract:The mechanical integrity of cement sheath during reservoir stimulation is critical for oil and gas wells. It is essential to optimize and design a cement slurry system that not only meets the primary cementing requirements but also has a good mechanical performance. In this study, effects of hybrid inorganic short-cut carbon fiber and basalt fiber on the rheological and mechanical performances of shale gas well cement were investigated. The rheological performance of prepared cement reinforced with hybrid inorganic fibers was researched by the viscometer, filtration loss meter, and consistometer. And the cement stone samples were tested by pressure testing machines. According to rheological behavior experimental results, the Power-law model was most suitable for describing the rheological behavior of slurries among the three models used in this study, and the rheological parameters, including consistency coefficient, yield point, and plastic viscosity of the studies cement slurries with fibers slightly increased in a suitable engineered addition. Combination of carbon fiber and basalt fiber can compromise the effect of the addition of a single fiber on the rheological properties of slurry and does not affect the workability and pumpability of slurry in terms of the fibers' additive amount of this study. Moreover, the fibers can also improve the sedimentation stability of cement slurry without significantly affecting its filtration loss and thickening time. In terms of mechanical properties of cement stone, no markedly difference in compressive strength was found between reference slurry and slurries with fibers, while the addition of carbon fiber and basalt fiber significantly improved the tensile strength and flexural strength, and also mitigated the brittleness of cement stone. The findings of this study can offer a key reference for the cement slurry design of oil and gas wells requiring reservoir stimulation.

A Review of Rheological Modeling of Cement Slurry in Oil Well Applications

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Rheological properties of cement-based slurry and evaluation of rheological model: Influence of particle size and shape

Improving the Rheological and Mechanical Properties of Oil Well Cement Slurries Using Multiple Chemical Admixtures for Enhancing Zonal Isolation: A Laboratory Evaluation

Development of rheological models depending on the time, temperature, and pressure of wellbore cement compositions: a case study of southern Iran's exploratory oilfields

Rheological and mechanical properties of oil-well cement reinforced by hybrid inorganic fibers

Numerical Simulation of Slurry Diffusion in Fractured Rocks Considering a Time-Varying Viscosity

Influence of the flocculation effect on the rheological properties of cement slurry

The Slump Flow of Cementitious Pastes: Simulation vs. Experiments

Rheological Behavior of Hydrate Slurry with Xanthan Gum and Carboxmethylcellulose under High Shear Rate Conditions

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Rheological modeling and simulation of semi-solid slurry based on experimental study

Rheo-viscoelastic Behavior and Viscosity Prediction of Calcium Sulphoaluminate Modified Portland Cement Pastes

Novel Method for Optimization Cement Slurry Based on the Wellbore Integrity Model in High-Temperature and High-Pressure Conditions

Rheological properties of cementitious composites with and without nano-materials: A comprehensive review

Influence of Cellulose Nanoparticles on Rheological Behavior of Oil Well Cement-Water Slurries

Fresh Cement as a Frictional Non-Brownian Suspension

Effect of Silica Flour and Potasium Chloride as Additives in the Rhelogical Properties of High Temperature High Pressure Gas Well Cement Slurry

Experiment research and mechanism analysis on rheological properties of tailings slurry

Modelling the Relations of Rheological Characteristics with Composition of Plaster Mortar

Discrepancies in dynamic yield stress measurements of cement pastes