Abstract:We propose a methodology for the rheological characterization of a semisolid metal slurry using experimental squeeze flow data. The slurry is modeled as a structural thixotropic viscoplastic material, obeying the regularized Herschel-Bulkley constitutive equation. All rheological parameters are assumed to vary with the structure parameter that is governed by a first-order kinetics accounting for the material structure breakdown and build-up. The squeeze flow is simulated using finite elements in a Lagrangian framework. The evolution of the sample height has been studied for wide ranges of the Bingham and Reynolds numbers, the power-law exponent as well as the kinetics parameters of the structure parameter. Systematic comparisons have been carried out with available experimental data on a semisolid aluminium alloy (A356), where the sample is compressed from its topside under a specified strain of 80% at a temperature of 582 oC while the bottom side remains fixed. Excellent agreement with the experimental data could be achieved provided that at the initial instances (up to 0.01s) of the experiment the applied load is much higher than the nominal experimental load and that the yield stress and the power-law exponent vary linearly with the structure parameter. The first assumption implies that a different model, such as an elastoviscoplastic one, needs to be employed during the initial stages of the experiment. As for the second one, the evolution of the sample height can be reproduced allowing the yield stress to vary from 0 (no structure) to a maximum nominal value (full structure) and the power-law exponent from 0.2 to 1.4, i.e., from the shear-thinning to the shear-thickening regime. These variations are consistent with the internal microstructure variation pattern known to be exhibited by semisolid slurries.

Rheological modeling and simulation of semi-solid slurry based on experimental study

Novel Undrained Servomechanism in Discrete-Element Modeling and Its Application in Multidirectional Cyclic Shearing Simulations

A Fully Resolved Smoothed Particle Hydrodynamics-Discrete Element Method Study of the Rheology of Suspensions: the Role of Inertia and Grain Shape

Rheological characterization of a thixotropic semisolid slurry by means of numerical simulations of squeeze flow experiments

Rheological Modeling of 7075 Aluminum Alloy Semi-Solid Slurry and its Application in the Simulation of SEED Rheocasting Process

Multiphase modelling of the transient flow for Sn-15Pb and 357.0 alloys in semi-solid die casting process

Effect of Solid Volume Concentration on Rheological Properties of Chengdu Clay Slurry

Study on the Numerical Model of Dense Solid Suspension Driven by a Coaxial Mixer

Comprehensive Assessment and Multiple-Response Optimization of Serpentine Channel Pouring Process for Achieving High-Quality Semi-Solid Slurry

Microstructural Evolution Mechanism of Semi-Solid Slurry: a Study Using Phase-Field-Lattice-Boltzmann Scheme

Rheological properties of cement-based slurry and evaluation of rheological model: Influence of particle size and shape

Fundamental Principles for Semi-solid Slurry Fabrication in Rheo-forming Techniques

Statistical Investigations of Serpentine Channel Pouring Process Parameters on Semi-Solid ZL101 Aluminum Alloy Slurry Using Response Surface Methodology

Comparison of Rheological Models to Simulate Die Filling Process of A356 Semisolid Alloy

Some Considerations on the Rheology of Dense Frictional Cylindrical Particles

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Compressional Rheology Model for Vacuum Filtration-Consolidation of Sludge in Geotextile Tubes

A Review of Rheological Modeling of Cement Slurry in Oil Well Applications

Experiment research and mechanism analysis on rheological properties of tailings slurry

Numerical Simulation of Liquid-Solid Two-Phase Flow in Slurry Pipeline Transportation

Rheological Behavior Of Sewage Sludge With High Solid Content