Abstract:The rapid advancement of 3D concrete printing (3DCP) and the development of relevant cementitious material compositions can be seen in the last few decades. The commonly used 3DCP method is to build the structure layer by layer after extruding the material through a nozzle. Initially, the pumping and extrusion of the material should be done with considerable fluidity and workability. The extruded layers should retain their shape immediately after extruding and depositing. While constructing the structure in a layerwise manner, the bottom layers should have enough early age strength to support the layers at the top. Therefore, at different processes in 3DCP, the rheological requirement is contradictory. As the rheology of the material is the deterministic factor which decides the fluidity or workability of the mix, proper rheological characterization should be completed accurately. In some instances, due to the higher stiffness, and higher time and rate-dependent material behavior (thixotropic behavior) compared to the conventional concrete, standard rheology measurement techniques have many limitations when used for 3DCP material. Therefore, non-conventional and novel techniques can be implemented with suitable material models to characterize the rheology of 3DCP material. In this study, a comprehensive review was conducted on conventional and non-conventional methods used for characterizing the rheological parameters for 3DCP material. The previously conducted studies were highlighted with the targeted 3DCP processes in the study (if applicable), and rheological parameters achieved from the test (i.e., yield stress, viscosity, and thixotropy). In addition, some experimental studies were conducted to compare several selected testing methods. The rheological parameters achieved from different test methods were compared to identify the similarities, dissimilarities, pros, and cons between the test methods. Furthermore, the extrudability and buildability studies were conducted for the mixes to demonstrate the usage of the mixes in 3DCP applications and to correlate the achieved rheological parameters with these processes.

Rheological properties of cementitious composites with and without nano-materials: A comprehensive review

An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites

Numerical Modelling of Flow Performance of Fresh Concrete Considering Rheological Characteristics

A Review of the Effect of Nano-Silica on the Mechanical and Durability Properties of Cementitious Composites

Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison

Influence of Nano Silica on Fresh and Hardened Properties of Cement-based Materials – A Review

Recent Progress in Nanomaterials for Modern Concrete Infrastructure: Advantages and Challenges

Optimizing mix proportions of blended cement composites through rheological and strength relations: A numerical modelling approach with curve fitting

Effects of cellulose nanofibrils on rheological and mechanical properties of 3D printable cement composites

On the Flow of a Cement Suspension: The Effects of Nano-Silica and Fly Ash Particles

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Rheological properties of cement-based slurry and evaluation of rheological model: Influence of particle size and shape

Effects of nanomaterials on mechanical properties in cementitious construction materials for high-strength concrete applications: a review

Influence of synthesized nanomaterials in the strength and durability of cementitious composites

Assessment of asymmetrical rheological behavior of cementitious material for 3D printing application

Nano-Silica-Modified Concrete: A Bibliographic Analysis and Comprehensive Review of Material Properties

A Review on Modeling Techniques of Cementitious Materials under Different Length Scales: Development and Future Prospects

Comparison of the Effect of Nano Cellulosic Additives on Rheological Parameters for 3D Printable Concretes

A review on the properties, reinforcing effects, and commercialization of nanomaterials for cement-based materials

A review on modeling of graphene and associated nanostructures reinforced concrete