Abstract:Pressure swing adsorption (PSA) appears to be an effective technology for biogas upgrading under different operating conditions with low greenhouse gas emissions. This study presents the simulation of biomethane adsorption with the adsorption bed filled with a carbon molecular sieve (CMS). A six dual-bed six-step PSA process was studied which produced a high purity of biomethane. The design of the adsorption bed was followed by the real process of which the biomethane capacity was more than 5000 Nm3/h. For the adsorbent, a CMS-3K was used, and a biomethane gas with a minimum 92% purity was produced at 6.5 bar adsorption pressure. To understand the adsorption characteristics of the CH4 and CO2 gases, the Langmuir isotherm model was used to determine the isotherm of a mixed gas containing 55% CH4 and 45% CO2. Furthermore, the experimental data from the work of Cavenati et al. were used to investigate the kinetic parameter and mass transfer coefficient. The mass transfer coefficients of two species were determined to be 0.0008 s−1 and 0.018 s−1 at 306 K for CH4 and CO2, respectively. The PSA process was then simulated with a cyclic steady state until the relative tolerance was 0.0005, which was then used to predict the CH4 and CO2 mole fraction along the adsorption bed length at a steady state. Moreover, the optimal conditions were analyzed using Aspen Adsorption to simulate various key operating parameters, such as flowrate, adsorption pressure and adsorption time. The results show a good agreement between the simulated results and the real operating data obtained from the company REBiofuel. Finally, the sensitivity analysis for the major parameters was presented. The optimal conditions were found to be an adsorption pressure of 6 bar, an adsorption time of 250 s and a purity of up to 97.92% with a flowrate reducing to 2000 Nm3/h. This study can serve as a commercial approach to reduce operating costs.

The Effect of the Packing Flow Area and Biogas Flow Rate on Biogas Purification in Packed Bed Scrubber

The Effect of the Packing Flow Area and Biogas Flow Rate on Biogas Purification in Packed Bed Scrubber

Performance Evaluation of Zn-Fe Adsorbent for H 2 S Adsorption During Biogas Purification

Impact of Saddle-Chips Biocarrier on Treating Mariculture Wastewater by Moving Bed Biofilm Reactor (MBBR): Mechanism and Kinetic Study

The effect of pressure on the concentration of methane and carbon dioxide absorption in biogas

Biogas Purification by Adsorption Method Using Activated Carbon and Zeolite Adsorbents

Carbon Dioxide Capturing via a Randomly Packed Bed Scrubber Using Primary and Poly Amine Absorbents

The use of novel packing material for improving methane oxidation in biofilters

The Effect of Amine Types on Breakthrough Separation of Methane on Biogas

Design and optimization of a packed bed scrubber for purification of waste gas containing ammonium

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Biogas recirculation technology: Effect on biogas purification, slurry characteristics, microbial activity and energy consumption

Design and Performance of an Adsorption Bed with Activated Carbons for Biogas Purification

Analysis and Assessment of H2S Sorption Capacity of the Selected Biofiltration Materials

Assessing the impact of packaging materials on anoxic biotrickling filtration of siloxanes in biogas: Effectiveness of activated carbon in removal performance

Enhanced Biogas Purification Using Low-Cost Adsorption and Absorption Techniques

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Enhancing performance of biocarriers facilitated gravity-driven membrane (GDM) reactor for decentralized wastewater treatment: Effect of internal recirculation and membrane packing density.

Experimental Study On Efficient Absorption Of Carbon Dioxide From Simulation Flue Gas By Rotary Packed Bed

Optimization of ex-situ biomethanation process in trickle bed reactor: The impact of slight H 2 /CO 2 ratio adjustments and different packing materials

Modelling Selective CO2 Absorption and Validation via Photosynthetic Bacteria and Chemical Adsorbents for Methane Purification in Anaerobic Fermentation Bioreactors