Abstract:Biogas is essential in our pursuit of sustainable energy solutions, in our journey towards a greener and sustainable future. To become commercially viable, biogas requires purification, particularly the removal of impurities like CO 2 , so that it meets the fuel quality standards. This study evaluated activated charcoal's potential as an adsorbent for biogas upgrading. The focus is on its ability to effectively remove impurities such as CO 2 in a four-step pressure swing adsorption (PSA) cycle. SEM, BET, FT-IR, and XRD analyses provide insights into its physical and chemical attributes. The study began by examining the dynamic fixed-bed adsorption behavior of CO 2 and CH 4 at 300 K and 2.5 bar. A numerical model was developed to elucidate the activated charcoal's dynamic behavior during methane enrichment and CO 2 capture, considering both its characterization and the adsorption bed's geometry. The model was further refined using the extended Langmuir model to enhance the representation of the multicomponent adsorption. A novel approach was introduced by incorporating non-isothermal/non-adiabatic assumptions into the dynamic simulations, thereby providing a more accurate reflection of a PSA system in real-world applications. Aspen Adsorption platform was utilized during dynamic simulations, and the model was validated using experimental breakthrough data. The model assessed how parameters like temperature, length-to-diameter (L/D) ratio, and CO 2 content in feed affect biomethane purity. Process optimization of the biogas upgrading was achieved through design of experiment (DoE) methodology, utilizing central composite design (CCD) and desirability analysis. The results demonstrated a biomethane purity level of 99.96% and a recovery rate of 96.22% at a temperature of 0 °C, an L/D ratio of 15, and a feed CO 2 content of 30%, underscoring the efficacy of activated charcoal and its capability to meet the stringent fuel standards, thereby positioning it as a reliable material for biogas upgrading.

Biogas Purification by Adsorption Method Using Activated Carbon and Zeolite Adsorbents

Performance Evaluation of Zn-Fe Adsorbent for H 2 S Adsorption During Biogas Purification

Biogas upgrading to fuel quality by dynamic adsorption of activated charcoal under non-isothermal conditions

Enhanced Biogas Purification Using Low-Cost Adsorption and Absorption Techniques

High-pressure gas adsorption on activated carbons from pomegranate peels biochar: A promising approach for biogas purification

Modified mesoporous silica derived from bamboo leaf using cetyltrimethylammonium bromide and 3-aminopropyl triethoxysilane as CO2 adsorbent in biogas purification

The effect of pressure on the concentration of methane and carbon dioxide absorption in biogas

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Rice husk-based biochar for carbon dioxide adsorption in biogas

Upgrading strategies for effective utilization of biogas

RESEARCH OF METHANE PRODUCTION PROCESS FROM BIOGAS AND PYROLYSIS GAS

Design and Performance of an Adsorption Bed with Activated Carbons for Biogas Purification

Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization

Production of green methane by carbon dioxide capture from landfill biogas via pressure swing adsorption mediated by MOF ZIF-8

Biogas cleaning and upgrading with natural zeolites from tuffs

The Effect of the Packing Flow Area and Biogas Flow Rate on Biogas Purification in Packed Bed Scrubber

Advancing biogas purification: A systematic numerical study of MOF performance under humid conditions

Preliminary study of molecular sieve materials to alleviate problems faced by tropical peatland

Adsorption and purification of biogas inside graphitic nanopores: molecular dynamics simulation approach

Biogas Upgrading to Methane: Application of a Regenerable Polyethyleneimine-Impregnated Polymeric Resin (NKA-9) Via CO2 Sorption