Abstract:This paper presents a procedure for simplified collapse probability prediction of RC frame buildings when subjected to ground motion intensities commonly used in designing buildings. For this purpose, seismic collapse probability of a range of RC moment resisting frame buildings are assessed at the design basis earthquake (DBE) and the maximum considered earthquake (MCE) levels of seismic intensity by conducting more than a thousand nonlinear response history analyses (NRHA) using a suite of 40 seismic ground motion records. The 13 buildings included in the investigation have different heights (5–15 storeys) and footprints (3–6 bays), are designed to different target maximum inter‐storey drifts (within the code specified limit), and have critical members detailed to sustain different levels of confinement and anti‐buckling demands. The NRHA results consistently demonstrate that the design inter‐storey drift and the anti‐buckling detailing of longitudinal rebars in the critical frame members strongly influence the collapse probability of RC frame buildings. The results also show that while RC frame buildings designed to reach 2.5% (or less) inter‐storey drifts and detailed for ductile seismic performance can successfully avoid collapse at DBE, avoidance of collapse at DBE cannot be guaranteed if RC frames are designed to reach a target drift of more than 2% and not detailed for full ductility. At MCE, collapse probability is found to consistently exceed 10% unless the building is designed to incur no more than 1% plastic drift and the frame members have ductile detailing. Based on the NRHA results of the 13 case study buildings, easy‐to‐use equations relating their seismic collapse probability at MCE with the design drift and a quantifiable measure of ductile detailing are generated and validated by comparing with the collapse probability obtained by NRHA of an independent RC frame building. The proposed equations provide a rapid, yet reasonably reliable tool for performance‐based seismic design of RC frame buildings, and enable designers to estimate seismic collapse probability of RC frame buildings without having to conduct cumbersome NRHA.

Seismic Vulnerability Assessment of RC Frame Buildings Designed Using the DDBD Approach: A Parametric Study

Assessing seismic fragility on direct displacement-based designed RC frame considering SSI effect

A Direct Displacement-Based Design Procedure for Base-Isolated Building Structures with Lead Rubber Bearings (Lrbs)

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

A simplified procedure for seismic collapse probability assessment of RC frame buildings

Assessment of RC Frame Structure under Different Seismic Condition

A performance-based rehabilitation strategy for RC frame buildings in moderate seismic regions

Application of Endurance Time Method in Seismic Assessment of RC Frames Designed by Direct Displacement-Based Procedure

Effect of Variation in Shapes of High Rise Structures on Resistance against Seismic Loads

Seismic vulnerability assessment of RC high-rise building considering soil–structure interaction effects

Estimation of inelastic displacement ratio spectrum for existing RC structures via displacement response spectrum

Seismic Assessment of Existing Gravity Load-Designed RC Framed Building

A multi‐objective performance‐based seismic design framework for building typologies

Study of Displacement-Based Seismic Design for RC Frame Structures

Assessing and Quantifying the Earthquake Response of Reinforced Concrete Buckling-Restrained Brace Frame Structures

A Performance-Based Design Approach for Rectangular Concrete-Filled Steel Tube (RCFT) Frames under Seismic Loading

Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads

Effects of Seismic and Progressive Collapse Designs on the Vulnerability of RC Frame Structures

Probabilistic Seismic Safety Assessment of Chinese RC Frame Structures Using Fragility Curves

Effect of site amplification on seismic fragility of RC building with different infill configurations using synthetic ground motions

Dynamic Increase Factor for Nonlinear Static Analysis of RC Frame Buildings Against Progressive Collapse