Abstract:Pushover analysis has been recommended as a reliable tool to estimate the seismic capacity of the structures. Vertical irregular structures are highly vulnerable during earthquakes due to stiffness irregularity in their elevations. Hence, seismic capacities of these types of structures need to be re-estimated during structural design stage. So, in this paper, an attempt has been made to assess the actual seismic performance of buildings with two common types of vertical irregularities such as; soft story and setback in comparison with regular (reference) building. These types of vertical irregularities are studied in individual cases, combined in one story, and combined in two different stories of the building models, while most previous studies satisfy with individual type of vertical irregularity case in the studied model. In addition, combined vertical irregularity generates extra weak points, which alter the seismic capacities, failure mode mechanism, and performance point location. Three-dimensional numerical models are created to find out significant response demand such as; the variation in periods of vibration, lateral displacement, inter-story drift, pushover curve, and plastic hinges formation. The results showed that vertical irregular buildings are subjected to early damages and have less seismic capacity than regular one. The fundamental time period becomes misleading term in seismic force calculation for vertical geometric irregular buildings and needs to be re-considered. In addition, extra lateral displacement and inter-story drift are passively generated in the vertical irregular buildings due to sudden change in stiffness. Significant negative variation in the pushover curves, ductility ratios, and plastic hinges’ formation is observed when combinations of pre-mentioned vertical irregularity cases occur. Buildings with open soft ground story with asymmetric setback should have additional precautions from international codes during structural design stage according to their irregularity ratio. Therefore, response modification/reduction factor (R) may be scaled-down to adapt these negative variation in seismic capacities.

Effect of site amplification on seismic fragility of RC building with different infill configurations using synthetic ground motions

Fragility curves for existing reinforced concrete buildings, including soil–structure interaction and site amplification effects

Assessing seismic fragility on direct displacement-based designed RC frame considering SSI effect

Probabilistic Seismic Performance Assessment of Tall RC Special Moment-resisting Frame Buildings Equipped with Buckling-restrained Braces under Near-field Excitations

Effect of aftershock characteristics on the fragility curve of post-mainshock RC frames

Seismic Fragility Analysis of Hollow Concrete Block Infilled Reinforced Concrete Buildings

Multivariable fragility surfaces for earthquake-induced damage assessment of buildings integrating structural features

Effect of open-ground storey on RC frame buildings incorporating soil–structure interaction

Fragility Curves of a RC Frame Building Subjected to Seismic Ground Motions

Effect of prevalent irregular configuration of infills on the seismic collapse of Indian RC buildings

Effect of Variation in Shapes of High Rise Structures on Resistance against Seismic Loads

Seismic vulnerability assessment of RC high-rise building considering soil–structure interaction effects

Fragility curves of masonry buildings in aggregate accounting for local mechanisms and site effects

Vertical Geometric Irregularity Effect on Performance-Based Seismic Design for Moderate Rise RC Moment Resisting Frame Buildings

A performance-based rehabilitation strategy for RC frame buildings in moderate seismic regions

Seismic Behaviour of RC Framed Building Supported on Combined Piled Raft Foundation in Sandy Soil

Effect of Seismic Design Provisions of Indian Standards on Seismic Response of URM Infilled RC Buildings on Hill

Fragility functions for non-ductile infilled reinforced concrete buildings using next-generation intensity measures based on analytical models and empirical data from past earthquakes

Effect of Infilled Frames on Reduction Factor (R) for RC Irregular Structure

The effect of openings in URM infills on the seismic resilience of a reinforced concrete building

Seismic Assessment of Existing Gravity Load-Designed RC Framed Building