Abstract:This paper presents a procedure for simplified collapse probability prediction of RC frame buildings when subjected to ground motion intensities commonly used in designing buildings. For this purpose, seismic collapse probability of a range of RC moment resisting frame buildings are assessed at the design basis earthquake (DBE) and the maximum considered earthquake (MCE) levels of seismic intensity by conducting more than a thousand nonlinear response history analyses (NRHA) using a suite of 40 seismic ground motion records. The 13 buildings included in the investigation have different heights (5–15 storeys) and footprints (3–6 bays), are designed to different target maximum inter‐storey drifts (within the code specified limit), and have critical members detailed to sustain different levels of confinement and anti‐buckling demands. The NRHA results consistently demonstrate that the design inter‐storey drift and the anti‐buckling detailing of longitudinal rebars in the critical frame members strongly influence the collapse probability of RC frame buildings. The results also show that while RC frame buildings designed to reach 2.5% (or less) inter‐storey drifts and detailed for ductile seismic performance can successfully avoid collapse at DBE, avoidance of collapse at DBE cannot be guaranteed if RC frames are designed to reach a target drift of more than 2% and not detailed for full ductility. At MCE, collapse probability is found to consistently exceed 10% unless the building is designed to incur no more than 1% plastic drift and the frame members have ductile detailing. Based on the NRHA results of the 13 case study buildings, easy‐to‐use equations relating their seismic collapse probability at MCE with the design drift and a quantifiable measure of ductile detailing are generated and validated by comparing with the collapse probability obtained by NRHA of an independent RC frame building. The proposed equations provide a rapid, yet reasonably reliable tool for performance‐based seismic design of RC frame buildings, and enable designers to estimate seismic collapse probability of RC frame buildings without having to conduct cumbersome NRHA.

Seismic Assessment of Existing Gravity Load-Designed RC Framed Building

Assessment of RC Frame Structure under Different Seismic Condition

Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads

A performance-based rehabilitation strategy for RC frame buildings in moderate seismic regions

Assessing seismic fragility on direct displacement-based designed RC frame considering SSI effect

Effect of Variation in Shapes of High Rise Structures on Resistance against Seismic Loads

Seismic Performance Assessment of Masonary Infilled RC Frames by Using Staad PRO

UPGRADING THE SEISMIC PERFORMANCE OF EXISTING MASONRY–INFILLED RC FRAMES USING FRP BRACINGS

A simplified procedure for seismic collapse probability assessment of RC frame buildings

Evaluation of the seismic behavior of reinforced concrete structures with flat slab-column gravity frame and shear walls through nonlinear analysis methods

Seismic damage mechanism control of rc ductile frames from astiffness point of view

Performance Of Mixed Ordinary AndHigh Strength Steel Reinforced Concrete Frames

SEISMIC FRAGILITY ANALYSIS ON NON-DUCTILE RC FRAME STRUCTURES RETROFITTED WITH FRP

Seismic Vulnerability Assessment of RC Frame Buildings Designed Using the DDBD Approach: A Parametric Study

Recent Advances on Analysis Methods and Modelling Approaches for Seismic Assessment and Design of Infilled RC Buildings

A Performance-Based Design Approach for Rectangular Concrete-Filled Steel Tube (RCFT) Frames under Seismic Loading

Local and global integrative retrofitting of reinforced concrete frames using in‐plane buckling steel braces

Seismic capacity evaluation of corroded reinforced concrete frame structures

Simulation of Reinforced Recycled Aggregate Concrete Frames Subjected to Seismic Loading

Comparative seismic performance assessment of RC and RC/ECC hybrid frame structures: a shake table study

Influence of the modelling approach on the seismic assessment of RC structures by nonlinear static analyses