Abstract:This paper presents a procedure for simplified collapse probability prediction of RC frame buildings when subjected to ground motion intensities commonly used in designing buildings. For this purpose, seismic collapse probability of a range of RC moment resisting frame buildings are assessed at the design basis earthquake (DBE) and the maximum considered earthquake (MCE) levels of seismic intensity by conducting more than a thousand nonlinear response history analyses (NRHA) using a suite of 40 seismic ground motion records. The 13 buildings included in the investigation have different heights (5–15 storeys) and footprints (3–6 bays), are designed to different target maximum inter‐storey drifts (within the code specified limit), and have critical members detailed to sustain different levels of confinement and anti‐buckling demands. The NRHA results consistently demonstrate that the design inter‐storey drift and the anti‐buckling detailing of longitudinal rebars in the critical frame members strongly influence the collapse probability of RC frame buildings. The results also show that while RC frame buildings designed to reach 2.5% (or less) inter‐storey drifts and detailed for ductile seismic performance can successfully avoid collapse at DBE, avoidance of collapse at DBE cannot be guaranteed if RC frames are designed to reach a target drift of more than 2% and not detailed for full ductility. At MCE, collapse probability is found to consistently exceed 10% unless the building is designed to incur no more than 1% plastic drift and the frame members have ductile detailing. Based on the NRHA results of the 13 case study buildings, easy‐to‐use equations relating their seismic collapse probability at MCE with the design drift and a quantifiable measure of ductile detailing are generated and validated by comparing with the collapse probability obtained by NRHA of an independent RC frame building. The proposed equations provide a rapid, yet reasonably reliable tool for performance‐based seismic design of RC frame buildings, and enable designers to estimate seismic collapse probability of RC frame buildings without having to conduct cumbersome NRHA.

Prediction of Seismic Collapse Vulnerability of RC Frame Based on Pushover Analysis Method

Research on the Guarantee Rate and Suitability of Pushover Analysis Method for Reinforced Concrete Frame Structure

Uncertainty analysis on progressive collapse of RC frame structures under dynamic column removal scenarios

SEISMIC EVALUATION METHOD FOR RC FRAME STRUCTURES

Component Deformation-Based Collapse Evaluation of RC Frame under Different Collapse Criteria

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Reliability analysis of reinforced concrete structure against progressive collapse

Refined Seismic Design Method for RC Frame Structures to Increase the Collapse Resistant Capacity

Study on the RC Frame with the Partial Infill Wall in Pushover Analysis

A simplified procedure for seismic collapse probability assessment of RC frame buildings

ASSESSMENT OF SIDESWAY COLLAPSE RESISTANT CAPACITY OF REINFORCED CONCRETE FRAME STRUCTURES BASED ON PUSHOVER ANALYSIS

Risk-based Life Cycle Cost–benefit Analysis for Progressive Collapse Design of RC Frame Structures

Robustness Analysis for Progressive Collapse of Structures Using ALP-based Pushover Analysis Approach

Study on Seismic Collapse Resistance Evaluation Method of Weak Layer in RC Frame Structures

Robustness Assessment for Progressive Collapse of Framed Structures Using Pushdown Analysis Method

Seismic Failure Mode Improvement of RC Frame Structure Based on Multiple Lateral Load Patterns of Pushover Analyses

Response analysis of RC frame structures in progressive collapse after the member failure

Probability-Based Progressive Collapse-Resistant Assessment for Reinforced Concrete Frame Structures

Global Seismic Reliability Analysis Of Rc Frame Structure

Probabilistic Seismic Performance Assessment of RC Frame Structures Considering Dynamic Effect and Structural Parameter Uncertainties