Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

A Simplified Analysis Method for Reinforced Concrete Arch Bridge under Exceptionally Serious Earthquake

Investigation of elasto-plastic seismic response analysis method for complex steel bridges

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Effect of Transverse Earthquake Action on Development of Seismic Damage of Steel Arch Bridges

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Residual seismic performance of steel bridges under earthquake sequence

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Research on the Guarantee Rate and Suitability of Pushover Analysis Method for Reinforced Concrete Frame Structure

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Overload-Induced Progressive Collapse Simulation For A Reinforced Concrete Arch Bridge

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

SEISMIC ANALYSIS OF MULTI-SPAN CONTINUOUS REINFORCED CONCRETE RIGID-FRAME ARCH-BRIDGE

Improved bridge capacity rating methods based on system reliability assessment

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Seismic performance assessment and retrofitted by buckling-restrained braces for half-through concrete-filled steel tubular arch bridge with the vertical suspended deck system

Behavior of Composite Rigid Frame Bridge under Bi-Directional Seismic Excitations