Abstract:Earthquake-induced building collapse and progressive collapse due to accidental local failure of vertical components are the two most common failure modes of reinforced concrete (RC) frame structures. Conventional design methods usually focus on the design requirements of a specific hazard but neglect the interactions between different designs. For example, the progressive collapse design of an RC frame often yields increased reinforcement and flexural strength of the beams. As a result, the seismic design principle of "strong-column-weak-beam" may be violated, which may lead to unfavorable failure modes and weaken the seismic performance. To avoid these adverse effects of the progressive collapse design on the seismic resistance of RC frames, a novel structural detailing is proposed in this study. The proposed detailing technique intends to concurrently improve the seismic and progressive collapse performances of an RC frame by changing the layout of the newly added longitudinal reinforcement against progressive collapse without introducing any additional reinforcement. A six-story RC frame is used as the prototype building for this investigation. Both cyclic and progressive collapse tests are conducted to validate the performance of the proposed structural detailing. Based on the experimental results, detailed finite element (FE) models of the RC frame with different reinforcement layouts are established. The seismic and progressive collapse resistances of different models are compared based on the incremental dynamic analysis (IDA) and nonlinear dynamic alternate path (AP) methods, respectively. The results indicate that the proposed structural detailing can effectively resolve the conflict between the seismic and progressive collapse designs.

Study on Uniform Collapse Risk Evaluation Method for Building Structures under Earthquakes

Behavior and Design of Earthquake Resistant Concrete Structure

Uniform-risk-targeted Seismic Design for Collapse Safety of Building Structures

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Influence of Three-dimensional Ground Motion Input on IDA-based Collapse Fragility Analysis

Seismic Collapse Resistance of RC Frame Structures——case Studies on Seismic Damages of Several RC Frame Structures under Extreme Ground Motion in Wenchuan Earthquake

Study on the Seismic Collapse Resistance of Structural System

Prediction of Seismic Collapse Vulnerability of RC Frame Based on Pushover Analysis Method

Collapse Prevention of Building Structures:A Lesson from the Wenchuan Earthquake

Influence of Structural Parameters to the Seismic Collapse Resistance of RC Frames in 7-degree Seismic Fortification Zone

Effects of Seismic and Progressive Collapse Designs on the Vulnerability of RC Frame Structures

Evaluation of collapse resistance of RC frame structures for Chinese schools in seismic design categories B and C

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

Comparison of collapse-resistant capacities of RC frames with seismic fortification categories B and C

Study of collapse resistant capacity spectrum

An Evaluation Method for Progressive Collapse Resistance Based on a Collapse Probability and a Resistance Reservation Indexes

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

Experimental studies on a novel structural detailing of RC frames to resist earthquake and progressive collapse

Design of Controllable Seismic Ruins for Training Base of Emergency Seismic Rescue Troops in China (ⅰ):Destructive Mode of Structures in Earthquake

Design Objectives and Collapse Prevention for Building Structures in Mega-Earthquake

Lessons from the Collapse of Typical RC Frames in Xuankou School During the Great Wenchuan Earthquake