Abstract:Earthquake-induced building collapse and progressive collapse due to accidental local failure of vertical components are the two most common failure modes of reinforced concrete (RC) frame structures. Conventional design methods usually focus on the design requirements of a specific hazard but neglect the interactions between different designs. For example, the progressive collapse design of an RC frame often yields increased reinforcement and flexural strength of the beams. As a result, the seismic design principle of "strong-column-weak-beam" may be violated, which may lead to unfavorable failure modes and weaken the seismic performance. To avoid these adverse effects of the progressive collapse design on the seismic resistance of RC frames, a novel structural detailing is proposed in this study. The proposed detailing technique intends to concurrently improve the seismic and progressive collapse performances of an RC frame by changing the layout of the newly added longitudinal reinforcement against progressive collapse without introducing any additional reinforcement. A six-story RC frame is used as the prototype building for this investigation. Both cyclic and progressive collapse tests are conducted to validate the performance of the proposed structural detailing. Based on the experimental results, detailed finite element (FE) models of the RC frame with different reinforcement layouts are established. The seismic and progressive collapse resistances of different models are compared based on the incremental dynamic analysis (IDA) and nonlinear dynamic alternate path (AP) methods, respectively. The results indicate that the proposed structural detailing can effectively resolve the conflict between the seismic and progressive collapse designs.

Influence of Structural Parameters to the Seismic Collapse Resistance of RC Frames in 7-degree Seismic Fortification Zone

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

Experimental studies on a novel structural detailing of RC frames to resist earthquake and progressive collapse

INFLUENCE OF SEISMIC ACTION ADJUSTMENTS ON SEISMIC DESIGN AND SAFETY OF RC FRAMES

Evaluation of collapse resistance of RC frame structures for Chinese schools in seismic design categories B and C

Lessons from the Collapse of Typical RC Frames in Xuankou School During the Great Wenchuan Earthquake

Analysis of the damage mechanism of a typical RC frame in Wenchuan Earthquake

Comparison of collapse-resistant capacities of RC frames with seismic fortification categories B and C

Experimental Study of Novel Concrete Frames Considering Earthquake and Progressive Collapse

Effects of Seismic and Progressive Collapse Designs on the Vulnerability of RC Frame Structures

Study on the Strengthening Effect of A Typical Rc Frame in Wenchuan Earthquake with Attached Substructures

Experimental Study on Seismic Behavior of Beijing Goldfield Center Irregular RC Frame Models

Experimental Study of a Novel Multi-Hazard Resistant Prefabricated Concrete Frame Structure

Assessment of RC Frame Structure under Different Seismic Condition

STUDY ON DESIGN METHOD TO RESIST PROGRESSIVE COLLAPSE FOR REINFORCED CONCRETE FRAMES

Seismic Collapse Resistance of RC Frame Structures——case Studies on Seismic Damages of Several RC Frame Structures under Extreme Ground Motion in Wenchuan Earthquake

RESEARCH ON THE INFLUENCE OF SOIL-STRUCTURE INTERACTION ON THE COLLAPSE OF FRAME STRUCTURE

Seismic capacity evaluation of corroded reinforced concrete frame structures

SEISMIC DAMAGE FIELD OBSERVATION AND VULNERABILITY ANALYSIS OF MULTILAYER REINFORCED CONCRETE FRAME STRUCTURE