Abstract:The main preconditions emergence of an environmental crisis in the country due to surface water pollution include irrational use of water resources in violation of the environmental requirements, discharge of untreated and insufficiently treated industrial and municipal wastewater into water bodies and inflow of polluting substances from agricultural lands as a result of surface water drainage. The whole set of considered factors leads to depletion and pollution of surface water of Ukraine, reduction of their self-cleaning capacity, degradation, impoverishment and collapse of aquatic ecosystems. Excessive content of heavy metal ions in surface water has a negative impact on the environment, causing acute and chronic diseases. Ingress of such pollutants into surface water is almost entirely due to anthropogenic economic activity. Wastewater from chemical, ferrous and nonferrous metallurgy brings a great amount of such pollutants. Among various methods used for removing heavy metal ions from aqueous media, sorption methods remain one of the most effective and popular, mainly due to the fact that they ensure a high degree of purification at relatively low costs. Along with the adsorbents traditionally involved in these processes, a number of studies and practical implementations with use of natural dispersed minerals as adsorbents were conducted lately. The research aims at studying the sorption capacity and efficiency of natural and modified sorbent such as bentonite clay for purification of aqueous solutions containing heavy metal ions in the form of dissolved compounds and justifying its potential application. It studies the efficiency of wastewater treatment aimed at removing heavy metal ions by the natural clay sorbent of bentonite clays of the Cherkaskyi Deposit (Dashukovskyi deposit). The paper presents a technique for modification of bentonite clay in order to increase its adsorption capacity for heavy metal ions using the following three methods: physical (thermal), chemical (processing with application of Iron(III) chloride solution) and combined (thermal processing of the original sorbent followed by processing with application of Iron(III) chloride solution). It has been experimentally proved that a natural sorbent modified via thermal and chemical processing is characterized by a high absorption capacity to heavy metal ions contained in water solutions, in particular to chromium(VI) ions, copper(II) ions and aluminum(III) ions with the purification degree ranging from 5% to 83%. The highest adsorption rate, 83%, is demonstrated by the combined method of bentonite clay modification, therefore proving the effectiveness of application of environmentally friendly natural sorbents for wastewater treatment processes aimed at removing heavy metal ions. The paper indicates the advantages of wastewater treatment sorption methods allowing removal of pollutants of different origin and any concentration.

Effect of Acid Modification on Porous Structure and Adsorption Properties of Different Type Ukrainian Clays for Water Purification Technologies

Analysis of sorption capacity of natural sorbents in relation to aqueous solutions of heavy metal compounds

Synthesis and characterization of kaolinite-based granular adsorbents for the removal of Cu(II), Cd(II), Co(II), Zn(II), and Cr(VI) from contaminated water

Water purification from cationic organic dyes using kaolin-based ceramic materials

Adsorption behaviour of pollutants: Heavy metals, radionuclides, organic pollutants, on clays and their minerals (raw, modified and treated): A review

Adsorption of organic water pollutants by clays and clay minerals composites: A comprehensive review

DEVELOPMENT OF SORPTION MATERIALS OF WIDE FUNCTIONAL PURPOSE IN THE V.I. VERNADSKII INSTITUTE OF GENERAL AND INORGANIC CHEMISTRY OF THE NAS OF UKRAINE

Organoclays Based on Bentonite and Various Types of Surfactants as Heavy Metal Remediants

Clay–polymer Nanocomposites: Progress and Challenges for Use in Sustainable Water Treatment

Clay minerals and clay-based materials for heavy metals pollution control

Recent advances in clay minerals for groundwater pollution control and remediation

Clay-Based Nanocomposite Materials Used in Treatment of Wastewater: Recent Advancements, Cost Investigation and Future Perspectives

Research and Application of Non-metallic Mineral Adsorbents on Water Treatment

MODELING THE ADSORPTION ABILITY OF CLAYS AT THE STAGES OF LITHOGENESIS

A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade

Preparation and characterization of clay based ceramic porous membranes and their use for the removal of lead ions from synthetic wastewater with an insight into the removal mechanism

Ionic Polyacrylamides as Stability-Modifying Substances of Soil Mineral Suspensions Containing Heavy Metal Impurities

Ammonia hydroxide and citric acid modified wheat straw-biochars: Preparation, characterization, and environmental applications

Comparison of adsorption affinity of anionic and cationic polyacrylamides for montmorillonite surface in the presence of chromium(VI) ions

Clay mineral adsorbents for heavy metal removal from wastewater: a review

Modification of palygorskites by alkali-acid and the effect of the phosphorus removal