Abstract:The object of this study is granular adsorbents based on kaolinite and zero-valent iron. The ceramic mass for their preparation contained polyvinyl alcohol as a powder-forming additive. It was established that its addition in quantities of 1.8–3.3 % practically does not change the porosity of the granules but increases their strength. X-ray phase and chemical analyzes confirmed the presence of a layer of zero-valent iron on the surface of the granules. The structural and sorption characteristics of sorption materials have been studied and the calculations of the main parameters of their porous structure were carried out. It is shown that when modifying granules with zero-valent iron, there is a decrease in the specific surface area and micropores volume for samples without a powder-forming additive by almost 2 times compared to the original granules. Moreover, these values almost do not change for samples obtained with the addition of polyvinyl alcohol. It was found that the application of the reaction layer to the granules leads to a significant increase in their sorption capacity with respect to heavy metal ions Cu(II), Cd(II), Co(II), Zn(II), and Cr(VI). It has been shown that the resulting adsorbents can be used for wastewater treatment containing a mixture of these toxicants. It was found that the values of maximum sorption on modified samples are 10–20 times higher than those for the original granules. A feature of the obtained adsorbents is the ability to simultaneously remove metal ions, both in the form of cations and anions. A significant increase in the sorption values of Cr(VI) anionic forms, which are difficult to remove from water by natural ion exchangers, has been established. It has been shown that granules based on kaolinite and zero-valent iron are effective adsorbents for water purification from heavy metal ions. The resulting materials can be used for wastewater treatment of electroplating industries and hydrometallurgical industry

Research and Application of Non-metallic Mineral Adsorbents on Water Treatment

Recent advances in clay minerals for groundwater pollution control and remediation

Natural zeolites as effective adsorbents in water and wastewater treatment

Clay minerals and clay-based materials for heavy metals pollution control

Research progress of the application of diatomite to industrial wastewater treatment

Polymer and Polymer Based Nanocomposite Adsorbents for Water Treatment

Adsorption of organic water pollutants by clays and clay minerals composites: A comprehensive review

A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade

Recent Progress on the Adsorption of Heavy Metal Ions Pb(II) and Cu(II) from Wastewater

Clay mineral adsorbents for heavy metal removal from wastewater: a review

Bimetallic adsorbents for wastewater treatment: a review

RETRACTED ARTICLE: Sensor-based characteristics of kaolin and the adsorption of heavy metal ions

Clay–polymer Nanocomposites: Progress and Challenges for Use in Sustainable Water Treatment

Synthesis and characterization of kaolinite-based granular adsorbents for the removal of Cu(II), Cd(II), Co(II), Zn(II), and Cr(VI) from contaminated water

Nanomaterials-Enabled Water and Wastewater Treatment

Experimental Study of the Adsorption of Nitrogen and Phosphorus by Natural Clay Minerals

Recent Advances in Metal-Organic Frameworks for Water Absorption and their Applications

Adsorption Performance of Typical Natural or Modified Sorbents for Removal of Heavy Metal Ions in Water

Clay–polymer nanocomposites for effective water treatment: opportunities, challenges, and future prospects

Mesoporous Materials for Water Treatment

Recent Developments in the Adsorption of Heavy Metal Ions from Aqueous Solutions Using Various Nanomaterials