Abstract:In this study, a green solvent-free drying production method was used to prepare an attapulgite clay/lanthanum and aluminum (ACLA) composite as a novel phosphorus (P) sorbent to immobilize P in lake sediment. The prepared sorbent contained around 5% La and 2% Al. The maximum P sorption capacity of ACLA can reach as high as 34.6 mg P/g and is higher than most clay-based P sorbents. The addition of ACLA into sediment can effectively reduce sediment mobile P and simultaneously induce elevated inert P forms of HCl-P and NaOH-rP, which also can increase the stability of P in sediment. Long-term sediment core incubation indicated that 72.2% of total phosphorus and 90.7% of soluble reactive phosphate (SRP), as well as 44.2% SRP fluxes, can be reduced with a dosage of 466 mg/m<sup>2</sup> of ACLA when compared with the control treatment. The P binding mechanism by ACLA is assigned to the intersphere P complexes and is mainly because of the formation of rhabdophane and aluminum phosphate precipitation on ACLA. This is confirmed by results of the XPS and <sup>31</sup>P NMR spectroscopy, which indicate that the La/Al coexisting novel P inactivation agents are a promising sorbent for lake sediment P control.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c03277?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c03277</a>.General list of the ACLA composites; XRD pattern of raw attapulgite and ACLA composites; P form changes forms in sediment amended with ACLA and Phoslock; P fractions in unamended and amended sediment cores with ACLA at different dosages in the long-term P inactivated experiment; XPS spectra of ACLA before and after phosphate sorption; physical and chemical properties of water and sediment used in the present study; Langmuir and Freundlich isotherms of phosphate sorption on ACLA composites and Phoslock; comparison of P sorption capacities of different La-based sorbents; Langmuir and Freundlich model; method to analyze physical and chemical properties of raw and modified attapulgite; HR-peeper description, data interpretation, and chemical analysis; and sequential extraction of sediment P forms (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c03277/suppl_file/es0c03277_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Modification of palygorskites by alkali-acid and the effect of the phosphorus removal

Alkali-treated Yttrium-Containing Chitosan-Based Hydrogels for Phosphate Recover with Highly Selective in Wide Ph Aqueous Solution

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Study on Adsorption Properties of Heat-and Acid-treatment Palygorskite Clays for Pb~(2+)

Characterization of La–Mg-modified Palygorskite and Its Adsorption of Phosphate

Phosphate and Ammonium Adsorption Removal from Wastewater by Modiifed Attapulgite

New process for phosphorus removal with the combination of biological medium addition and calcium hydroxyphosphate crystallization

Thermal activation of palygorskite for enhanced fluoride removal under alkaline conditions

Preparation of the Lanthanum–Aluminum-Amended Attapulgite Composite as a Novel Inactivation Material to Immobilize Phosphorus in Lake Sediment

Treating waste with waste: adsorption behavior and mechanism of phosphate in water by modified phosphogypsum biochar

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Purification of natural palygorskite clay: Process optimization, cleaner production, mineral characterization, and decolorization performance

Selective Recovery of Phosphorus from the Leachate of Incinerated Sewage Sludge Ash Using the Zr-modified Acid-Leaching Residue As Adsorbent for Two-Fold Resource Utilization

Acid treatment enhances phosphorus release and recovery from waste activated sludge: Performances and related mechanisms

Raw and modified palygorskite in water treatment applications for low‐concentration ammonium removal

Study of Semi-Dry High Target Solidification/Stabilization of Harmful Impurities in Phosphogypsum by Modification

Comparison of Palygorskite and Struvite Supported Palygorskite Derived from Phosphate Recovery in Wastewater for In-Situ Immobilization of Cu, Pb and Cd in Contaminated Soil.

Study on Phosphorus Adsorption Performance of Inorganic Modified Green Mudstone

Adsorption of PAM in Wastewater Onto Modified Attapulgite

Phosphorus removal and recovery from water with macroporous bead adsorbent constituted of alginate-Zr4+ and PNIPAM-interpenetrated networks

Characteristic pollutant purification analysis of modified phosphogypsum comprehensive utilization