Abstract:In the present work, a ZnS:Ni loaded on sponge‐activated carbon was synthesized and applied as an effective adsorbent to remove bromophenol blue dye from aqueous solutions. Then various techniques were used to characterize the ZnS:Ni–SAC. The effective parameters of the removal efficiency were investigated and optimized by response surface methodology. In the present work, a ZnS:Ni loaded on sponge‐activated carbon (SAC) was synthesized and applied as an effective adsorbent to remove bromophenol blue (BPB) dye from aqueous solutions. Various techniques such as Fourier‐transform infrared, X‐ray diffraction, transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and Brunauer‐Emmett‐Teller (BET) were used to characterize ZnS:Ni–SAC. The effective parameters such as BPB concentration, amount of ZnS:Ni–SAC, ultrasonic time, and pH of the aqueous solution were investigated and optimized by response surface methodology. To investigate the accuracy and reliability of the proposed method, the analysis of variance was used based on p‐values and F‐test. The optimal values of the parameters were obtained using the desirability function, and they were as follows: 15 mg L−1 BPB concentration, 20 min sonication time, 18 mg of ZnS:Ni–SAC, and pH = 7. To evaluate the adsorption mechanism and calculation of maximum adsorption capacity, different adsorption isotherms were studied, and according to the obtained results, the Langmuir isotherm model showed the highest compatibility due to its higher R2 (0.997). Also, the proposed adsorbent represented good adsorption capacity (125 mg g−1). Moreover, kinetic studies proved the applicability of the pseudo‐second‐order model (R2 = 0.986) compared to other models. The achieved results confirmed the applicability of ZnS:Ni–SAC as a versatile adsorbent for the removal of BPB.

Decolorization of Dye Wastewater by Activated Carbons Produced from Peanut Shell using ZnCl2 Impregnation Method

Synthesis of activated carbon from peanut shell as dye adsorbents for wastewater treatment

Preparation of activated carbon from pine (Pinus radiata) sawdust by chemical activation with zinc chloride for wood dye adsorption

Dye adsorption properties of carbonized sludge and its application for treating dyeing wastewater

Application of waste peanut shells to form activated carbon and its utilization for the removal of Acid Yellow 36 from wastewater

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

Removal of acidic dyes; acid yellow 25 and acid red 4 from wastewater by degassed activated carbon

Study on the coagulation treatment of activated dye wastewater

ZnCl<sub>2</sub>-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies

Experimental Study on Treatment of Dyeing Wastewater by Activated Carbon Adsorption, Coagulation and Fenton Oxidation

Enhanced adsorption performance of activated carbon prepared from peanut shell for the adsorption of dyes from aqueous solution

Adsorption enhancement of Congo red dye from wastewater based on edamame shell originated activated carbon by the cations: Experimental and theoretical studies

Adsorption of congo red and methylene blue dyes on an ashitaba waste and a walnut shell-based activated carbon from aqueous solutions: Experiments, characterization and physical interpretations

Adsorption Isotherms and Kinetic Studies of Congo-Red Removal from Waste Water Using Activated Carbon Prepared from Jujube Seed

Adsorption of congo red dye from aqueous solutions by prepared activated carbon with oxygen-containing functional groups and its regeneration

A novel activated carbon material from peanut shells for the removal of methyl orange and methylene blue dyes from wastewater: kinetics, isotherms and mechanism

Application of ZnS:Ni Loaded on Sponge‐Activated Carbon as an Efficient Adsorbent for Dye Removal

Chemical regeneration of activated carbon used for dye adsorption

Chitosan impregnated sugarcane bagasse biochar for removal of anionic dyes from wastewater

Production of High Surface Area Activated Carbon from Peanut Shell by Chemical Activation with Zinc Chloride: Optimisation and Characterization

Comparison of Oil-Seed Shell Biomass-Based Biochar for the Removal of Anionic Dyes—Characterization and Adsorption Efficiency Studies