Abstract:Highlights • Si-N@EBB2:1 was successfully synthesized and utilized for treatment of dye-containing water. • Adsorption of AB25 onto Si-N@EBB2:1 was optimized via response surface methodology. • Under optimum adsorption conditions, AB25 removal efficiency was 96.03± 2.57 %. • Experimental data fitted well pseudo-second-order model and Langmuir isotherm with large uptake capacity of 197.44 mg/g. • Multifaceted interaction mechanisms greatly influenced the removal of AB25 by Si-N@EBB2:1. Background Dye sequestration from textile wastewater is required prior to discharge because of environmental concerns and the potential risk posed by colored contaminants. Methods Herein , a novel composite adsorbent of biochar derived from eucalyptus bark and 3-aminopropyl triethoxysilane (TESPA, as source of silica) and diethylene triamine (DIEN, as source of nitrogen) was synthesized via impregnation method. The prepared adsorbents were characterized by scanning electron microscopy-energy dispersive X-ray (SEM-EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, N 2 adsorption-desorption and pH at point of zero charge (pH pzc ) analyses. The optimal TESPA: DIEN molar ratio for the silica-nitrogen doped eucalyptus bark biochar (Si-N@EBB) composite to adsorb acid blue 25 (AB25) dye was 2:1. The independent process parameters (contact duration, adsorbent dosage, pH and initial AB25 concentration) influencing the AB25 adsorption by Si-N@EBB2:1 were optimized by Box-Behnken design in response surface methodology at temperature of 26± 2 °C. The obtained experimental data were analyzed by the Langmuir, Freundlich and Temkin isotherms. Kinetic data obtained at various AB25 concentrations were evaluated using pseudo-first-order (PFO), pseudo-second-order (PSO) and intraparticle diffusion equations. Significant Findings Predicted values of removal efficiency were found to be in agreement with the experimental values obtained ( R 2 = 0.9823; Adj − R 2 = 0.9646). Optimization findings revealed that maximum removal efficiency of 96.03± 2.57 % was achieved at the optimum conditions of 21.01 mg L − 1 initial AB25 concentration, 3.91 dye solution pH, 0.913 g L − 1 adsorbent dosage and 117.2 min contact duration. The equilibrium adsorption data fitted well to the Langmuir isotherm with a monolayer uptake capacity found to be 197.4 mg g − 1 . PSO model suited the kinetic data well, indicating the dominance of chemisorption mechanism. Graphical abstract Download : Download high-res image (262KB) Download : Download full-size image

Application of ZnS:Ni Loaded on Sponge‐Activated Carbon as an Efficient Adsorbent for Dye Removal

Synthesis of nickel sulfide nanoparticles loaded on activated carbon as a novel adsorbent for the competitive removal of Methylene blue and Safranin-O

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Application of powdered activated carbon coated with zinc oxide nanoparticles prepared using a green synthesis in removal of Reactive Blue 19 and Reactive Black-5: adsorption isotherm and kinetic models

Synthesis and application of SBA-15 adsorbent for the removal of organic and inorganic substances

In-situ synthesis of efficient ZnCl2 doped pyrolyzed biochar for adsorptive remediation of organic dyes: Performance evaluation, mass transfer and mechanism

Simultaneous ultrasound-assisted ternary adsorption of dyes onto copper-doped zinc sulfide nanoparticles loaded on activated carbon: optimization by response surface methodology

Optimization of hydrothermal synthesis conditions of Bidens pilosa-derived NiFe2O4@AC for dye adsorption using response surface methodology and Box-Behnken design

ZnO-Saponite Nanocomposite: Input of Adsorption and Photocatalysis for Removal of Rhodamine B Dye

Effective adsorption and removal of industrial dye from aqueous solution using mesoporous zinc oxide nanoparticles via metal organic frame work: equilibrium, kinetics and thermodynamic studies

Zwitterion Adsorbent of Crosslinked Chitosan-Benzil/Algae/Coal Fly Ash for Anionic (Remazol Brilliant Blue R) and Cationic (Thionine) Dyes Removal: Box–Behnken Design Optimization

High removal of methylene blue and methyl violet dyes from aqueous solutions using efficient biomaterial byproduct

Applicability of AgNPs/GO/Na 2 SiO 3 nanocomposite as a charged nanosorbent in the removal of cationic and anionic model dyes from water

Novel sulfonic groups grafted sugarcane bagasse biosorbent for efficient removal of cationic dyes from wastewater

Application of Optimization Response Surface for the Adsorption of Methylene Blue Dye onto Zinc-coated Activated Carbon

Convenient synthesis of porous carbon nanospheres with tunable pore structure and excellent adsorption capacity

Preparation of activated carbon from pine (Pinus radiata) sawdust by chemical activation with zinc chloride for wood dye adsorption

Removal of Orange G and Rhodamine B dyes from aqueous system using hydrothermally synthesized zinc oxide loaded activated carbon (ZnO-AC)

Adsorptive removal of anthraquinone dye from wastewater using silica-nitrogen reformed eucalyptus bark biochar: Parametric optimization, isotherm and kinetic studies

Polyaniline as a Nitrogen Source and Lignosulfonate as a Sulphur Source for the Preparation of the Porous Carbon Adsorption of Dyes and Heavy Metal Ions

Chitosan-Terephthalic Acid-Magnetic Composite Beads for Effective Removal of the Acid Blue Dye from Aqueous Solutions: Kinetics, Isotherm, and Statistical Modeling