Abstract:Recently, the treatment of waste water by Zr-based adsorbents had significantly attracted wide interest among researchers owing to its distinct features. The unique properties of Zr such as thermal stability, large size, high positive charge, greater mechanical rigidity and acid-base nature are mainly responsible for its diverse application. In this work, designing of the new adsorbent material containing tetravalent Zr metal oxide layered double hydroxide (LDH) composite for the removal of anionic dye was studied. The modification of LDH was conducted via the urea hydrolysis method by using zirconium salts as a precursor material. The adsorption efficiency of the as-synthesized material represented as ZrO2/MgAl-LDH was investigated for the decontamination of congo red (CR) dye from an aqueous medium. The adsorbent ZrO2/MgAl-LDH composite was characterized by several instrumental techniques including powder X-ray diffraction (P-XRD), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy(FT-Ir), scanning emission microscopy(SEM), energy dispersive X-ray(EDX), transmission emission microscopy(TEM) and thermogravimetric analysis(TGA). The influence of several experimental factors on the adsorption equilibrium studies such as pH, temperature, initial dye concentration, contact time, adsorbent dosages, and interfering ions are examined under optimized conditions. The thermodynamic study manifests the spontaneous and endothermic nature of the sorption process. Additionally, based on fitting the experimental data with different models the isotherm and kinetics mechanism are found to be more appropriate with Langmuir isotherm, Redlich-Peterson isotherm, and pseudo-second-order kinetics. The spectral analysis further indicates the oxidizing nature of the material, therefore favoring the adsorption of anionic dye. The maximum dye removal efficiency of ZrO2/MgAl-LDH reached up to 97.19% under the optimum reaction condition (initial dye concentration = 50 mg/L, contact dosages = 0.02 g, temperature = 303 K). In addition, the maximum monolayer adsorption capacity (qmax= 169.42 mg) for CR adsorption also reveals its superiority in adsorption test. Moreover, the adsorbent can be easily retrieved and reused up to fifth cycle. Therefore, the characterization and experimental results of ZrO2/MgAl-LDH affirms its potential application for effective decontamination of waste water.

Effective adsorption and removal of industrial dye from aqueous solution using mesoporous zinc oxide nanoparticles via metal organic frame work: equilibrium, kinetics and thermodynamic studies

Adsorption of industrial dye onto a zirconium metal-organic framework: synthesis, characterization, kinetics, thermodynamics, and DFT calculations

Nanozinc ferrites @ silica as efficient adsorbent for dye removal from wastewater: synthesis and adsorption studies

Zinc Oxide Nanoparticles and Their Application in Adsorption of Toxic Dye from Aqueous Solution

Removal of Textile Wastewater Pollutants Using Zeolite Mineral as Adsorbent: Isotherm Studies

Synthesis of ZrO2/MgAl-LDH composites and evaluation of its isotherm, kinetics and thermodynamic properties in the adsorption of congo red dye

Enhancing the removal of methylene blue by modified ZnO nanoparticles: kinetics and equilibrium studies

Probing the structural transformation of ZIF-L to ZnO for sustainable Congo Red Dye Removal

Deep eutectic solvent mediated synthesis of ZnO nanoparticles and their catalytic activity for the removal of hazardous organic dyes

Computational supported experimental insights in adsorption of Congo Red using ZnO/doped ZnO in aqueous solution

Application of powdered activated carbon coated with zinc oxide nanoparticles prepared using a green synthesis in removal of Reactive Blue 19 and Reactive Black-5: adsorption isotherm and kinetic models

Efficiency and selectivity of cost-effective Zn-MOF for dye removal, kinetic and thermodynamic approach

Chemical synthesis of ZnO, CuO, MnO and FeO Nano adsorbent and their application in anionic reactive blue turquoise 71 dye (RB-71 dye) and real effluents remediation: Batch adsorption and column studies

Adsorptive Removal of Congo Red Using Organically Modified Zinc–Copper–Nickel Ternary Metal Hydroxide: Kinetics, Isotherms and Adsorption Studies

Kinetic and thermodynamic studies of Methylene Blue adsorption process from aqueous solutions by MIL-101(Cr)@ZnO nanostructure

Controlled removal of textile azo dye Congo red from aqueous system using PEG-ZnO/rGO composite

Synthesis and Characterization of Zinc Oxide Nanoparticle Anchored Carbon as Hybrid Adsorbent Materials for Effective Heavy Metals Uptake from Wastewater

Effective removal of textile dye via synergy of adsorption and photocatalysis over ZnS nanoparticles: Synthesis, modeling, and mechanism

Synthesis of high surface area mesoporous ZnAl 2 O 4 with excellent photocatalytic activity for the photodegradation of Congo Red dye

Effective adsorption of fluorescent congo red azo dye from aqueous solution by green synthesized nanosphere ZnO/CuO composite using propolis as bee byproduct extract

Removal of methylene blue dye from aqueous solutions by adsorption in combination with ozonation on iron loaded sodium zeolite: role of adsorption