Abstract:A novel test apparatus used to measure the pressure distribution of spool valve with notches has been designed, thus the mechanism of the noise differences related to the different notches can be investigated. Some small holes used to detecting pressure were arranged on a sleeve that can be shifted and rotated in preset locations. Several ways are introduced to minimize the internal leakage, which include the hydraulic force used to close the gaps between the sleeve and valve body, the large distance between the small holes and a high requirement of small clearances between the body, the spool and the sleeve. The effect of this test apparatus on the flow field inside the valve is limited to the minimum to improve the accuracy of the method proposed. The experimental results of pressure distribution are agreed well with the CFD results as a whole, particularly in diverging flow direction in notch (called 'FLOW-OUT'). In converging flow (call 'FLOW-IN'), the correspondence between the experiment and CFD results is not good as the former due to the numerical errors in CFD. The CFD and experimental results of two typical notches, the sloping notch (V-notch) and the notch with a passage of same cross-section areas (U-notch), was presented in this paper. As a result, it is revealed that the U-notch has a two-stage orifice characteristic that can be helpful to suppress the cavitation noise.

Hydraulic flow noise characterization of spool valves using experimental techniques

Noise Properties in Spool Valves with Cavitating Flow

Numerical Investigation of Cavitation Flow Inside Spool Valve with Large Pressure Drop

Numerical Simulation of Flow-Induced Noise in High Pressure Reducing Valve

Investigation into pressure distribution of spool value with notches

Flow-induced vibration and noise in control valve

Unbalanced Force Analysis on Valve Core Clamping in Hydraulic Spool Valves

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Squeal Noise in Hydraulic Poppet Valves

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

INVESTIGATION INTO CAVITATION INDUCED NOISE WITHIN HYDRAULIC RELIEF VALVE

Numerical investigation of flow induced noise in control valve

Structure Characteristics of Valve Port in the Rotation-Spool-type Electro-Hydraulic Vibrator

Numerical and experimental investigation of cavitation characteristics of the electronic expansion valves

Simulation and Design Improvement of a Low Noise Control Valve in Autonomous Underwater Vehicles

Experimental Methods for Measuring the Viscous Friction Coefficient in Hydraulic Spool Valves

Numerical analysis of aerodynamic noise in a high parameter pressure reducing valve

Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve

Flow-induced Noise Mechanism and Optimization Design of Electronic Expansion Valve

The Effect Of Pressure Distribution On High Speed Cavitation Flow Inside Throttling Valve

Numerical Study on the Axial Flow Force of a Spool Valve