Abstract:A novel finding that the electrochemical performance of the commercial lithium titanate (Li 4 Ti 5 O 12 , LTO) can be significantly improved by using a novel current collector of CuI particles modified copper foil is reported for the first time in this work. Firstly, a large number of particles with well-defined shapes were prepared on the commercial copper foil surface via a very simple soaking process, in which the soaking solution contained only CuSO 4 , H 2 SO 4 and [Bmim]I. As indicated by the XRD and XPS measurements, the particles observed on the surface of the copper foil were identified as CuI particles. That is, CuI particles modified copper foils (denoted as CuI/Cu) were successfully prepared at room temperature. CuI/Cu prepared in the presence of 0.4, 0.6 and 0.8 g of [Bmim]I were nominated as CF (copper foil) a, b and c, respectively. Inconceivably, as compared to the conventional LTO electrode, the LTO electrodes assembled using the newly prepared CFs exhibited a significantly improved electrochemical performance, i.e., all as-prepared CFs showed an evident promoting effect on the electrochemical performance of the traditional LTO electrodes. For instance, the initial discharge capacity (DC) of the LTO electrode assembled using CF b (called electrode b) at 0.2 C was 307 mAh g −1 , which was about 1.86 times higher than that of the LTO electrode prepared using the conventional copper foil current collector (165 mAh g −1 ). Particularly, as the applied current rate was as high as 10 C, the DC value of electrode b (117 mAh g −1 ), even after 100 cycles, was still about 2.54 times that of the traditional LTO electrode (46 mAh g −1 ). In this preliminary work, a new method for preparing CuI particles was developed, along with a novel approach to significantly improve the electrochemical properties of the commercial LTO electrode. The method did not require any strong oxidants or reducing agents, nor did it demand any additional energy expenditure during the preparation of CuI particles. Moreover, the approach did not require any changes in the assembly procedure for the LTO electrodes being studied. This work was very meaningful for the development of the CuI-related research field as well as for the electrochemical performance improvement of LTO-based lithium-ion batteries (LIBs).

Promoting Effect of Cobblestone-shaped CuI Nanoparticles Immobilized on the Copper Foil Surface on the Electrochemical Performance of the Conventional Graphite Electrode

Preparation of CuBr Nanoparticles on the Surface of the Commercial Copper Foil Via a Soaking Method at Room Temperature: Its Unexpected Facilitation to the Discharge Capacity of the Commercial Graphite Electrode

Nanostructured hybrid cobalt oxide/copper electrodes of lithium-ion batteries with reversible high-rate capabilities

Nanograined Copper Foil As a High-Performance Collector for Lithium-Ion Batteries

In Situ Preparation of CuCl Cubic Particles on the Commercial Copper Foil: Its Significant Facilitation to the Electrochemical Performance of the Commercial Graphite and Its Unexpected Photochromic Behavior

Significantly improved electrochemical performance of the commercial lithium titanate (Li4Ti5O12) achieved by using a novel current collector of cuprous iodide-modified copper foil

Microcrystalline copper foil as a high performance collector for lithium-ion batteries

Organic carbonized copper foil facilitates the performance of current collector for lithium-ion batteries

Cu Nanoparticles Derived from CuO Electrodes in Lithium Cells

Preparation of the Porous Copper Foil Current Collector for High-Performance Lithium-Ion Batteries by Electro-Codeposition: Effect of Stirring Speed

The Synergetic Effect Induced High Electrochemical Performance of CuO/Cu2O/Cu Nanocomposites as Lithium-Ion Battery Anodes

<i>In situ</i> coating of a lithiophilic interphase on a biporous Cu scaffold with vertical microchannels for dendrite-free Li metal batteries

Facile synthesis of electrocatalytically active Cu/graphite using the negative electrode of spent Li-ion batteries

Si/Cu/C Nanohybrid Lithium-Ion Battery Anode with in Situ Incorporation of Nonagglomerated Super-Small Copper Nanoparticles Based on Epoxy Resin

An Ionic Liquid-Present Immersion Method for Preparing Cotton Fiber-Shaped Cu2O Nanoparticles at Room Temperature

Cupric Hexacyanoferrate Nanoparticle Modified Carbon Ceramic Composite Electrodes

Copper Oxide Nanoparticles Anchored on Porous Carbon Nitride Nanosheets for Supercapacitor Applications

Modulating Electronic Structure with Copper Doping to Promote the Electrocatalytic Performance of Cobalt Disulfide in Li–O2 Batteries

Superior-capacity Binder-Free Anode Electrode for Lithium-Ion Batteries: CoxMny NizO Nanosheets with Metal/oxygen Vacancies Directly Formed on Cu Foil

Enhanced efficiency for carbon dioxide electroreduction to formate by electrodeposition Sn on Cu nanowires

In Situ Growth of CuO Nanoparticles on Graphene Matrix As Anode Material for Lithium-Ion Batteries