Abstract:Diamond is regarded as one of the most promising semiconductor materials used for high power devices because of its superior physical and electrical properties, such as wide bandgap, high breakdown electric field, high mobility, and high thermal conductivity. Highpower diamond devices are now receiving much attention. In particular, Schottky diode based on a metal/diamond junction has promising applications, and high breakdown voltage has been achieved, though unfortunately its forward resistance is high. In this paper, the first principles calculations are performed to study the electronic structure of interface and the Schottky barrier height of Al-diamond interface. The projection of the density of states on the atomic orbitals of the interface atoms reveals that the typical Al-induced gap states are associated with a smooth density of states in the bulk diamond band gap region, and these gap states are found to be localized within three atom layers. At the same time, electronic charge transfer makes the Fermi level upgrade on the side of diamond. Besides, the typical Al-induced gap state model gives a simple picture about what determines Schottky barrier height at Al-diamond interface, by assuming an ideal, defect-free and laterally homogeneous Schottky interface in which the only interaction comes from the decay of the electron wave function from the metal into the semiconductor, which in turn induces electronic charges to be rearranged in the region close to the interface. As for the electronic charge transfer, this potential shift can be extracted by subtracting the superimposed planar or macroscopically averaged electrostatic potentials of the Al and diamond surfaces (at frozen atomic positions), from the planar or macroscopically averaged potential of the relaxed Al-diamond interface. The electronic charge transfer suggests that the formation of an interface should be associated with the formation of new chemical bonds and substantial rearrangements of the electron charge density. Especially, we obtain the Schottky barrier height of 1.03 by the first principle, which is in good agreement with the results from phenomenological model and experiment. The research results in this paper can provide a theoretical basis for the research of the metal diamond Schottky junction diode, and can also give a theoretical reference for the research of the metal-semiconductor highpower device based on diamond material.

Density Functional Theory-Based Study of Ag/ZnO Schottky Diode

Microstructure, Wettability and Electrical Properties of N-Zno/zno-sl/p-cu2o Heterojunction

Analysis of the Electrical Characteristics of the Ag/ZnO Schottky Barrier Diodes on F-doped SnO2 Glass Substrates by Pulsed Laser Deposition

Fabrication and Transport Properties of ZnO∕Nb-1wt%-doped SrTiO3 Epitaxial Heterojunctions

Preparation of ZnO Thin Film Schottky Barrier Diode

Interface Electronic Structure and the Schottky Barrier at Al-Diamond Interface: Hybrid Density Functional Theory Hse06 Investigation

Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy

SCHOTTKY DIODE FABRICATION VIA COLD SUBSTRATE EVAPORATED Ag ON SOL-GEL DERIVED ZnO ULTRA-THIN FILMS FOR SEMICONDUCTOR DEVICES

Fabrication and Characterization of Flexible Ag/ZnO Schottky Diodes on Polyimide Substrates

Influence of Illumination Intensity on the Electrical Characteristics and Photoresponsivity of the Ag/ZnO Schottky Diodes

Experimental, theoretical and numerical simulation-based investigations on the fabricated Cu2ZnSn thin-film-based Schottky diodes with enhanced electron transport for solar cell

Fabrication and Characteristics of ZnO Thin Films with an Al/Si (100) Substrates

Low-Temperature-Processed Power Schottky Diode Based on Amorphous Indium-Tin-Zinc-Oxide/Indium-Gallium-Zinc-Oxide Bilayer

Synthesis of N-Type ZrO2 Doped Ε-Ga2o3 Thin Films by PLD and Fabrication of Schottky Diode

Density functional theory simulations of amorphous high-κ oxides on a compound semiconductor alloy: a-Al2O3/InGaAs(100)-(4×2), a-HfO2/InGaAs(100)-(4×2), and a-ZrO2/InGaAs(100)-(4×2)

Synthesis of plasmonic junction diodes based on Ag@ZnO core-shell nanostructures

Gold Schottky Contacts on N-Type ZnO Thin Films with an Al/Si(1 0 0) Substrates

Investigation of Morphology and Electrical Properties of Structures Based on the Heterojunction Monocrystalline Si/Microcrystalline ZnO

Growth of c-Axis Oriented Si-Based ZnO Films Using Al as Transitional Films and Fabrication of Its Schottky Diodes

Effect of nickel diffusion and oxygen behavior on heterojunction Schottky diodes of Au/NiO/ZnO with a NiO interlayer prepared by radio-frequency magnetron sputtering

Realization of Ultra-Scaled MoS 2 Vertical Diodes via Double-Side Electrodes Lamination