Abstract:Ultrawide bandgap β-(Al x Ga 1 −x ) 2 O 3 vertical Schottky barrier diodes on (010) β-Ga 2 O 3 substrates are demonstrated. The β-(Al x Ga 1 −x ) 2 O 3 epilayer has an Al composition of 21% and a nominal Si doping of 2 × 10 17 cm −3 grown by molecular beam epitaxy. Pt/Ti/Au has been employed as the top Schottky contact, whereas Ti/Au has been utilized as the bottom Ohmic contact. The fabricated devices show excellent rectification with a high on/off ratio of ∼10 9 , a turn-on voltage of 1.5 V, and an on-resistance of 3.4 mΩ cm 2 . Temperature-dependent forward current-voltage characteristics show effective Schottky barrier height varied from 0.91 to 1.18 eV while the ideality factor from 1.8 to 1.1 with increasing temperatures, which is ascribed to the inhomogeneity of the metal/semiconductor interface. The Schottky barrier height was considered a Gaussian distribution of potential, where the extracted mean barrier height and a standard deviation at zero bias were 1.81 and 0.18 eV, respectively. A comprehensive analysis of the device leakage was performed to identify possible leakage mechanisms by studying temperature-dependent reverse current-voltage characteristics. At reverse bias, due to the large Schottky barrier height, the contributions from thermionic emission and thermionic field emission are negligible. By fitting reverse leakage currents at different temperatures, it was identified that Poole–Frenkel emission and trap-assisted tunneling are the main leakage mechanisms at high- and low-temperature regimes, respectively. Electrons can tunnel through the Schottky barrier assisted by traps at low temperatures, while they can escape these traps at high temperatures and be transported under high electric fields. This work can serve as an important reference for the future development of ultrawide bandgap β-(Al x Ga 1 −x ) 2 O 3 power electronics, RF electronics, and ultraviolet photonics.

Low-Temperature-Processed Power Schottky Diode Based on Amorphous Indium-Tin-Zinc-Oxide/Indium-Gallium-Zinc-Oxide Bilayer

Design and Optimizing of Trench Schottky Barrier-Controlled Β-Ga2o3 Schottky Diode with Low Turn-on Voltage and Leakage Current

High-Performance Thin-Film IGZO Schottky Diodes with Sputtered PdOₓ Anode

Fabrication Of Diamond Based Schottky Barrier Diodes With Oxide Ramp Termination

Reliable High-Performance Amorphous InGaZnO Schottky Barrier Diodes with Silicon Dioxide Passivation Layer

Ga2O3/NiO junction barrier Schottky diodes with ultra-low barrier TiN contact

Low density of interface trap states and temperature dependence study of Ga2O3 Schottky barrier diode with p-NiOx termination

Self‐Stabilized Hydrogenation of Amorphous InGaZnO Schottky Diode with Bilayer Passivation

Low-Temperature Fabricated Amorphous Oxide Semiconductor Heterojunction Diode for Monolithic 3D Power Integration Applications

$β$-Ga$_2$O$_3$ Trench Schottky Diodes by Novel Low-Damage Ga-Flux Etching

A 1.6 Kv Ga2O3 Schottky Barrier Diode with a Low Reverse Current of 1.2 × 10−5 A/cm2 Enabled by Field Plates and N Ion-Implantation Edge Termination

High Performance Lateral Schottky Diodes Based on Quasi-Degenerated Ga 2 O 3

High Performance Indium-Tin-Oxide Schottky Diodes for Terahertz Band Operation

Over 1 GW/cm 2 Vertical Ga 2 O 3 Schottky Barrier Diodes Without Edge Termination

8.7 A/700 V Β-Ga2o3 Schottky Barrier Diode Demonstrated by Oxygen Annealing Combined with Self-Aligned Mesa Termination

2.7 Kv Low Leakage Vertical PtOx/β-Ga2O3 Schottky Barrier Diodes with Self-Aligned Mesa Termination

Ultrawide bandgap vertical β-(AlxGa1−x)2O3 Schottky barrier diodes on free-standing β-Ga2O3 substrates

Steep-slope Schottky diode with cold metal source

A Review of gallium oxide-based Power Schottky barrier diodes

High-Voltage Quasi-Vertical GaN Junction Barrier Schottky Diode with Fast Switching Characteristics

8.7 A/700 V β-Ga 2 O 3 Schottky barrier diode demonstrated by oxygen annealing combined with self-aligned mesa termination