Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Experimental study of tensile and flexural performances and failure mechanism of none-felt needled composites

Experimental and numerical study of impact resistance and compression properties after impact of none-felt needled composites

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

Effects of needle-punched felt structure on the mechanical properties of carbon/carbon composites

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Analysis of Mechanical Properties and Exploration of Failure Mechanism for Nonwoven Reinforced Composites

Tensile behaviors of nanoporous phenolic composites reinforced by 3D needle-punched preforms with different weave patterns

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

A new simulation method for characterizing the shear behavior of needled carbon fiber composites

Damage mechanism identification and failure behavior of 2D needle-punched SiC f /SiC composites based on acoustic emission and digital image correlation

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Dynamic Tensile Behavior and Fracture Mechanism of Polymer Composites Embedded with Tetraneedle-Shaped Zno Nanowhiskers

Multi-scale modeling and tensile failure prediction of 3D needled C/C-SiC composites considering real microstructure

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Investigation and prediction of laminate quality and interlaminar mechanical performance of the tufted sandwich composites with different core structures

Research on the Influence of Yarn Reduction on the Bending Performance of Three-dimensional Woven Composites

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Mechanical Properties and Failure Analysis of 3D-Woven Copper Wire/Glass Fiber Hybrid Composites

Evaluation of high-modulus, puncture-resistance composite nonwoven fabrics by response surface methodology