Abstract:Conventional flighted rotary drums usually have flights parallel to the rotating axis, which cannot facilitate the axial motion of the materials in the drum. Here, a new type of horizontal rotary drum with inclined flights and beads was designed. Inclined flights are used to facilitate the axial movement of beads and material, while beads are used as fillers to increase the gas-liquid contact area and to crush the solid materials. We simulated the drum and studied the axial motion of fillers using the discrete element method (DEM). To improve the mass and heat transfer performance, we optimized the distribution of beads in the active phase. The effects of the rotational speed, joint angle, and inlet flow rate in the drum were investigated systematically. The individual effects were evaluated in terms of the mass of particles in the active phase (MAP) and passive phase (MPP), the percentage of the active phase occupied by the particles (OAR), and the axial speed (AS). The response surface methodology (RSM) was used to investigate the significant effects of the interaction between the parameters. The maximum MAP value can be obtained by the following parameters: a rotational speed of 37 rpm, joint angle of 139°, and inlet flow rate of 7.83 kg/s. The interaction between rotational speed and inlet flow rate is the most significant for MAP. The joint angle and inlet flow rate have a significant interactive effect on AS. Besides, the rotational speed, joint angle and inlet flow rate show an interactive effect on OAR and AS. Based on the optimization results, the effect of the inclined angle on the axial motion of beads was also evaluated. The axial motion of the beads occurs mainly in the active phase. Compared to the drum without inclined flights, the drum with inclined flights has an enhanced axial speed increased by 26%. This study will be helpful for the design and optimization of drums with inclined flights.

Influence of baffles on mixing and heat transfer characteristics in an internally heated rotating drum

Enhancing Mixing of Particles by Baffles in A Rotating Drum Mixer

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Augmenting the Mixing of Size-Type Binary Granular Systems in A Rotating Horizontal Drum

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

DEM investigation of heat transfer in a drum mixer with lifters

Enhancing Mixing of Cohesive Particles by Baffles in a Rotary Drum

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Comparative studies of fluid mixing and heat transfer behaviors in a millimeter scale T-type mixer with triangular baffles

Numerical Simulation and Analysis of Particle Mixing and Conduction in Wavy Drums

Effects of baffles on separation of aqueous ethanol solution with hollow fibers

Heat transfer in indirect heated rotary drums filled with monodisperse spheres: Comparison of experiments with DEM simulations

2D DEM Simulation of Particle Mixing in Rotating Drum: A Parametric Study

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Heat transfer of cohesive particles in a rotary drum: Effect of material properties and processing conditions

Numerical Study of Mixing and Thermal Conduction of Granular Particles in Rotating Tumblers

Research on Heat Transfer Performance of Coaxial Mixer with Inner Combined Impeller

DEM Simulation of a Rotary Drum with Inclined Flights Using the Response Surface Methodology

Mass and heat transfer enhancement by a novel mixer with triangular-notched rectangular baffles for continuous flow chemical process