Abstract:The granular motion of binary-size mixture in a three-dimensional rotating drum operating in the rolling regime is numerically tracked via the discrete element method (DEM), with a focus on the axial dispersion behavior of the different particle types in response to the inherent size-segregation. Accordingly, the evolution with time, the frequency distribution and the space-time profiles of the axial dispersion coefficients are evaluated. The results demonstrate that (i) the fast radial segregation gives rise to the sharp increase and decrease of the axial dispersion coefficients of respectively the large and small particles in both the active and passive regions; (ii) the axial dispersion coefficients in the active region is an order-of-magnitude higher than that in the passive region; (iii) after the radial segregation, the frequency distributions of the axial dispersion coefficients of the large particles, the small particles and all the particles are normal distributions; (iv) the greatest axial dispersion coefficients of both particle types are at the upper part of the active region near the bed surface; (v) increasing the rotating speed and particle diameter ratio clearly enhances the axial dispersion intenstity in the active and passive regions; and (vi) axial segregation results in the greatest axial dispersion near the end walls, while most of the rest of the drum exhibit equally low axial dispersion. The results obtained here contribute towards understanding the dynamical response of the axial dispersion of different particle types to the inevitable radial and axial segregation phenomena, and are expected to be valuable for improving operations and advancing theoretical models of such granular systems with constituents of different sizes.

Enhancing Mixing of Particles by Baffles in A Rotating Drum Mixer

Augmenting the Mixing of Size-Type Binary Granular Systems in A Rotating Horizontal Drum

Enhancing Mixing of Cohesive Particles by Baffles in a Rotary Drum

Influence of baffles on mixing and heat transfer characteristics in an internally heated rotating drum

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Numerical Study on Particle Mixing in a Double-Screw Conical Mixer

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Numerical and Experimental Study of Radial Segregation of Bi-Disperse Particles in a Quasi-Two-dimensional Horizontal Rotating Drum

2D DEM Simulation of Particle Mixing in Rotating Drum: A Parametric Study

Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles

Micromixing Simulation of Novel Large-Double-Blade Impeller

Numerical Simulation of Tetrahedral Particle Mixing and Motion in Rotating Drums

Simulation of Mixing Process for Size-Type Binary Wet Particulate Systems in A Rotating Horizontal Drum by Discrete Element Method

Comparative studies of fluid mixing and heat transfer behaviors in a millimeter scale T-type mixer with triangular baffles

Numerical Study of Mixing of Binary-Sized Particles in Rotating Tumblers on the Effects of End-Walls and Size Ratios

Experimental Study on the Mixing and Dispersing of Floating Particles in Viscous System

Effect of Particle Shapes on Diffusion and Mixing in a Cylindrical Mixer with Rotating Paddles

Mixing Performance Analysis and Optimal Design of a Novel Passive Baffle Micromixer

A strategy for strengthening chaotic mixing of dual shaft eccentric mixers by changing non-Newtonian fluids kinetic energy distribution